Milwaukee High Cut Grey HPPE, Nitrile, Nylon, Spandex Work Gloves, Size 8, Nitrile Coating
- N° de stock RS:
- 269-4453
- Référence fabricant:
- 4932492041
- Fabricant:
- Milwaukee
Sous-total (1 unité)*
27,71 €
(TVA exclue)
33,53 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 12 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 27,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 269-4453
- Référence fabricant:
- 4932492041
- Fabricant:
- Milwaukee
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Milwaukee | |
| Size | 8 | |
| Product Type | Work Gloves | |
| Material | HPPE, Nitrile, Nylon, Spandex | |
| Colour | Grey | |
| EN 388 Abrasion | 4 | |
| EN 388 Tear | 4 | |
| EN 388 Puncture | 3 | |
| EN 388 Blade | Yes | |
| EN388 Cut - TDM-100 Test | F | |
| EN388 Cut - Coup Test | X | |
| Number of Gloves | 2 | |
| Resistance Features | Abrasion Resistant, Cut Resistant, Puncture Resistant, Tear Resistant | |
| Safety Standard | EN 388:2016, EN ISO 21420 | |
| Series | High Cut | |
| Coating | Nitrile | |
| EN 374 Chemical | No | |
| Standards/Approvals | EN388:2016 (4X43F), EN ISO 21420 | |
| EN 407 Thermal | No | |
| EN 511 Cold | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Milwaukee | ||
Size 8 | ||
Product Type Work Gloves | ||
Material HPPE, Nitrile, Nylon, Spandex | ||
Colour Grey | ||
EN 388 Abrasion 4 | ||
EN 388 Tear 4 | ||
EN 388 Puncture 3 | ||
EN 388 Blade Yes | ||
EN388 Cut - TDM-100 Test F | ||
EN388 Cut - Coup Test X | ||
Number of Gloves 2 | ||
Resistance Features Abrasion Resistant, Cut Resistant, Puncture Resistant, Tear Resistant | ||
Safety Standard EN 388:2016, EN ISO 21420 | ||
Series High Cut | ||
Coating Nitrile | ||
EN 374 Chemical No | ||
Standards/Approvals EN388:2016 (4X43F), EN ISO 21420 | ||
EN 407 Thermal No | ||
EN 511 Cold No | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
Milwaukee Work Gloves, Grey, Cut Resistant - 4932492041
This work gloves product provides hand protection for tasks where cut, abrasion, puncture and tear hazards are present. Designed for industrial settings, it combines high-performance fibres with reinforced coatings to protect technicians working on automation, electronics, electrical and mechanical assemblies while maintaining dexterity and breathability.
Features & Benefits
• EN388:2016 4X43F rating for high-level cut protection
• Tungsten reinforced safety gloves offering enhanced cut resistance
• Fibreglass HPPE high performance gloves for reduced cut propagation
• Nitrile-coated Palm for grip on oily surfaces
• 18-gauge construction delivering fine dexterity and tactile control
• Washable up to three times to extend usable service life
• Tungsten reinforced safety gloves offering enhanced cut resistance
• Fibreglass HPPE high performance gloves for reduced cut propagation
• Nitrile-coated Palm for grip on oily surfaces
• 18-gauge construction delivering fine dexterity and tactile control
• Washable up to three times to extend usable service life
**Applications**
• Suitable for handling sheet metal and Sharp components in automation
• Ideal for PCB assembly and electronics repair requiring touch sensitivity
• Used for wiring and cable work in electrical installations
• Can be used for mechanical fitting and machine maintenance tasks
• Suitable for workshop tasks where puncture resistant industrial gloves are needed
• Ideal for PCB assembly and electronics repair requiring touch sensitivity
• Used for wiring and cable work in electrical installations
• Can be used for mechanical fitting and machine maintenance tasks
• Suitable for workshop tasks where puncture resistant industrial gloves are needed
How should these gloves be stored to maintain performance?
Store in original packaging at -5°C to 35°C and 20%–75% relative humidity to preserve material integrity.
Are they suitable for touchscreen operation during assembly work?
Certain variants include SMARTSWIPE™ fingertips enabling device use without removing them.
What laundering limits apply to retain protection levels?
Normal wash process at maximum 40°C is permitted for applicable coated styles
follow wash-care symbols to avoid damage.
What materials contribute to tear and puncture resistance?
A combination of HPPE, fibreglass, nylon and spandex with strategic reinforcements provides tear and puncture resistance.
How long can they be used after production?
They may be used up to five years from production date when stored correctly, with in-use lifetime dependent on wear and abrasion.
Liens connexes
- Milwaukee High Cut Grey HPPE Nylon Size 7, Nitrile Coating
- Milwaukee High Cut Grey HPPE Nylon Size 9, Nitrile Coating
- Milwaukee High Cut Grey HPPE Nylon Size 11, Nitrile Coating
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves L, Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves S, Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves M, Nitrile
- Ansell HyFlex 11-571 Black HPPE HPPE Nylon Spandex Size 7, Nitrile
- Ansell HyFlex 11-571 Black HPPE HPPE Nylon Spandex Size 9, Nitrile