RF Solutions ESP32-C3-32S 3.0 → 3.6V dc WiFi Module, Bluetooth Low Energy (BLE), WiFi ADC, GPIO, I2C, SPI, UART

Voir l’ensemble des Wi-Fi Modules
Offre groupée disponible

Sous-total (1 paquet de 2 unités)*

13,54 €

(TVA exclue)

16,38 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En voie de retrait du marché
  • 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • 432 unité(s) finale(s) expédiée(s) à partir du 15 janvier 2026
Unité
Prix par unité
le paquet*
2 - 86,77 €13,54 €
10 - 986,14 €12,28 €
100 - 4985,80 €11,60 €
500 +5,705 €11,41 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
238-6922
Référence fabricant:
ESP32-C3-32S
Fabricant:
RF Solutions
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RF Solutions

Supported Protocol

Bluetooth Low Energy (BLE), WiFi

Supported Security Standards

AES, WEP

Supported Bus Interfaces

ADC, GPIO, I2C, SPI, UART

Supply Voltage

3.0 → 3.6V dc

Dimensions

25.5 x 18 x 3.1mm

Pays d'origine :
CN
The RF Solutions has This module core processor ESP32-C3 is a Wi-Fi+ BLE combination of system-level chips (SoC), designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc. ESP32-C3 with industry-leading low power and RF performance, supporting Wi-Fi IEEE802.11b/g/n agreements and BLE 5.0.ESP32-C3 chip is equipped with a RISC-V 32-bit single-core processor, operating frequency up to 160 MHz. The chip is support to have secondary development without using other microcontrollers or processors.

Complete Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
Support BLE5.0 and rate support：125Kbps, 500Kbps, 1Mbps, 2Mbps
32-bit RISC-V single-core processor, supports a clock frequency of up to 160 MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
SMD-38 package
Integrated Wi-Fi MAC/ BB/RF/PA/LNA/BLE
Support multiple sleep modes, deep sleep electric current is less than 5uA
UART rate up to 5Mbps
Support STA/AP/STA+AP mode and mix mode
Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network configuration
Support UART port local upgrade and remote firmware upgrade (FOTA)
General AT commands can be better understand
Support secondary development, integrated Linux development environment
ESP-C3-32S module acquiesce in using the built-in 4MByte Flash, meanwhile support external Flash version

Liens connexes