RS PRO 230V 0.8 bar Submersible Water Pump, 216L/min

N° de stock RS:: 124-1949
Numéro d'article Distrelec:: 303-90-779
Fabricant:: RS PRO

RS PRO 230V 0.8 bar Submersible Water Pump, 216L/min

Sous-total (1 unité)*

129,47 €

(TVA exclue)

156,66 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

8 unité(s) prête(s) à être expédiée(s)
Plus 468 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	129,47 €

*Prix donné à titre indicatif

N° de stock RS:: 124-1949
Numéro d'article Distrelec:: 303-90-779
Fabricant:: RS PRO

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	RS PRO
	Maximum Flow Rate	216L/min
	Product Type	Submersible Water Pump
	Supply Voltage	230V
	Inlet Connection Size	32 mm
	Maximum Operating Pressure	0.8 bar
	Body Material	Plastic
	Input Power	750W
	Maximum Fluid Temperature	35°C
	Standards/Approvals	No
	IP Rating	IPX8

	Sélectionner tout
	Marque RS PRO
	Maximum Flow Rate 216L/min
	Product Type Submersible Water Pump
	Supply Voltage 230V
	Inlet Connection Size 32 mm
	Maximum Operating Pressure 0.8 bar
	Body Material Plastic
	Input Power 750W
	Maximum Fluid Temperature 35°C
	Standards/Approvals No
	IP Rating IPX8

Pays d'origine :: CN

RS PRO Submersible Water Pumps

Need is the mother of innovation, pushing innovators and creators to make life easier for us all. Water, by nature, moves from an area of high pressure to an area of low pressure. The need to have local drainage becomes a flywheel for French-born inventor to create in 1687 simple, but practical construction, which is the beginning of the new era in Water Pumps.

A Water Pump is a mechanical device that can circulate water or raise it from one level to another. Water Pumps draw existing water into the Pump by suction through an inlet point. The inlet point has a lower rate of pressure than the outlet points. A water pump increases the rate of water to create a vacuum. At this time, the outlet point has a high-pressure level which forces out the water. The impeller plays first fiddle in the entire process as the action of the part increases the fluid's velocity and pressure towards the Pump outlet.

There are a few types of Water Pumps currently available on the market, including Submersible Pumps, Irrigation Pumps and Circulation Pumps. Quite often the categorisation focuses on Self-Priming Pumps, Centrifugal Pumps and Underwater Pumps.

We are proudly introducing our own branded RS PRO Submersible Water Pump with a maximum flow rate of 216 litres per minute, which equals approximately 1300 litres per hour. This high-quality Pump for liquids is ideal for clearing dirty water in general applications. The Pump offers a float switch, which turns on and off automatically with changes to the water level. Our Submersible Water Pump has a comfortable carry handle to operate in the depth of up to 7 meters, meaning a full consent to IPX8 regulations. The body material of plastic can control the maximum fluid temperature around + 35°C, whereas supply voltage is 230 V. The cable length of 10 m with a grain size up to 35 mm is a perfect Pump for flooded basement or rain-soaked foundations.

Features and Benefits

This Dirty Water Pump is ideal for general duties

Float switch turns the Pump on and off automatically

Comfortable carry handle

Works perfectly in the depth of up to 7 m (IPX8)

Overall size is 22 x 33 x 37 cm

Vortex impeller (plastic)

10-meter long cable with the capability of 35 mm grain size to deal with

The maximum flow rate of 216 litres per minute (approximately 1300 litres per hour)

3 stepped Adaptor and Elbow (fitting) of 25 mm, 32 mm and 40 mm

Applications

Residential in case of flooded basement

On construction sites

Industrial water extraction applications

Applies to rain socked foundations or draining containers

Works perfectly as Pump for slurries

Frequently asked questions

How long does a Water Pump last?

On average, the lifetime of the Submersible Pump is approximately 15 years. Having in mind that internal parts are under regular maintenance. Energy consumption represents about 90% of the total life cycle cost.

What lookout for when using the Water Pump?

Avoid overheats as this may damage internal components or cause burns and injuries.

Read carefully and follow the manual instruction.

Regular Checks (air leaks) and testing to make sure a safe operation is in place.

Check for any suction line blockage.

Always be cautious and use the Pump as intended, e.g. never operate Pumps in explosive or flammable environments, unless the construction of the Pump can perform such service safely.

Why RS PRO?

RS Pro is our family brand to go-to and brings you a wide range of high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we're confident of their exceptional quality, which means you can be convinced too.

Note

UK Plug Power Cord