W Robinson And Sons 230V Submersible Water Pump, 200L/min
- N° de stock RS:
- 331-8253
- Référence fabricant:
- N2081060E
- Fabricant:
- W Robinson And Sons
Visuel non contractuel
Sous-total (1 unité)*
515,30 €
(TVA exclue)
623,51 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 8 unité(s) expédiée(s) à partir du 05 mai 2026
- Plus 7 unité(s) expédiée(s) à partir du 28 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 515,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 331-8253
- Référence fabricant:
- N2081060E
- Fabricant:
- W Robinson And Sons
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | W Robinson And Sons | |
| Product Type | Submersible Water Pump | |
| Maximum Flow Rate | 200L/min | |
| Supply Voltage | 230V | |
| Inlet Connection Size | 1-1/4 in | |
| Maximum Head Size | 11m | |
| Body Material | Stainless Steel | |
| Input Power | 350W | |
| Maximum Fluid Temperature | 40°C | |
| Standards/Approvals | No | |
| IP Rating | IP68 | |
| Sélectionner tout | ||
|---|---|---|
Marque W Robinson And Sons | ||
Product Type Submersible Water Pump | ||
Maximum Flow Rate 200L/min | ||
Supply Voltage 230V | ||
Inlet Connection Size 1-1/4 in | ||
Maximum Head Size 11m | ||
Body Material Stainless Steel | ||
Input Power 350W | ||
Maximum Fluid Temperature 40°C | ||
Standards/Approvals No | ||
IP Rating IP68 | ||
- Pays d'origine :
- IT
W Robinson And Sons Submersible Water Pump
The W Robinson And Sons submersible wastewater pump is the latest device manufactured from 304 stainless steel. This centrifugal pump is used in conditions where contamination or rust is unacceptable. It is an effective product with a maximum flow rate of 200L/minute. The motor is cooled efficiently by a heat exchange chamber that enables the machine to operate over long periods without being immersed. This water pump is ideal for pumping drainage, rainwater, clean, waste, and domestic water.
Inclusion:
10m H07 RNF cable conforming to current regulations.
Features and Benefits
The supply voltage is 230V
Maximum fluid temperature is 40°C
Input power is 350W
Motor with thermal overload protection, double seal, and interchangeable ceramic brush on the rotating shaft
Lubricated in oil sump and protected by V-ring sand-guard
Self-sealing vortex system impeller in cast stainless steel
Allows solid matter Ø 20mm to pass-through
Applications
Industrial applications
Spraying booths
Liquid transfer
Washing system
Certifications
IP68 rated
Note
Euro Plug Power Cord
Powercord is fitted with a combined Type E + F connector - fitting for France, Belgium, Germany, Austria.
Powercord is fitted with a combined Type E + F connector - fitting for France, Belgium, Germany, Austria.
Liens connexes
- W Robinson And Sons 230 V Submersible Water Pump
- W Robinson And Sons 230 V Submersible Water Pump, 160 L/min
- W Robinson And Sons 230 V Submersible Water Pump, 80 L/min
- W Robinson And Sons 230 V Submersible Water Pump, 400 L/min
- W Robinson And Sons 230 V Submersible Water Pump, 120 L/min
- W Robinson And Sons 230 V Direct Coupling Submersible Water Pump, 200 L/min
- W Robinson And Sons 230 V Submersible Water Pump, 300 L/min
- W Robinson And Sons 230 V Direct Coupling Submersible Water Pump, 240 L/min