Bright Zinc Plated Steel Locking Washers, M8, DIN 7980
- N° de stock RS:
- 530-090
- Fabricant:
- RS PRO
35 En stock, livraison sous 1 jour(s) (stock Europe)
460 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix 1 sachet de 100
5,45 €
(TVA exclue)
6,59 €
(TVA incluse)
| Sachet(s) | Le Sachet | Prix par unité* |
| 1 - 4 | 5,45 € | 0,054 € |
| 5 - 9 | 5,19 € | 0,052 € |
| 10 - 29 | 4,92 € | 0,049 € |
| 30 + | 4,59 € | 0,046 € |
| *prix conseillé | ||
- N° de stock RS:
- 530-090
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
Détails du produit
RS PRO ZnPt Steel 1 Coil Spring Washer, M8
Need a fastener that can stand up to the toughest industrial conditions? Choose this spring coil washer from RS PRO. It's made from steel and has a bright zinc-plated finish, so it's durable and resistant to rust and corrosion.
The washer's split coil design means it grabs the nut and locks in place for a firm hold that won't come loose, even after regular heavy movement or shocks. The coil ends absorb the screwdriver's turning force, so you can tighten the nut as much as you need to without damaging the washer.
The split visibly closes as you fix the fasteners on, allowing you to see when it's fully tightened. Coil washers like this are commonly used to assemble or repair heavy industrial machinery and equipment that's prone to vibration.
The washer's split coil design means it grabs the nut and locks in place for a firm hold that won't come loose, even after regular heavy movement or shocks. The coil ends absorb the screwdriver's turning force, so you can tighten the nut as much as you need to without damaging the washer.
The split visibly closes as you fix the fasteners on, allowing you to see when it's fully tightened. Coil washers like this are commonly used to assemble or repair heavy industrial machinery and equipment that's prone to vibration.
Features and Benefits
- Bright zinc-plated finish
- M8 for screw/bolt size
- Inside diameter of 8 mm
- Steel material
- Outside diameter of 12.7 mm
- Thickness of 2 mm
- Spring washer type
Spécifications
Attribut | Valeur |
|---|---|
| For Screw/Bolt Size | M8 |
| Washer Type | Locking |
| Inside Diameter | 8mm |
| Outside Diameter | 12.7mm |
| Material | Steel |
| Standards Met | DIN 7980 |
| Finish | Bright Zinc Plated |
| Thickness | 2mm |
- N° de stock RS:
- 530-090
- Fabricant:
- RS PRO