Martindale VI13800, LED Voltage tester, 600V ac/dc, From Unit Under Test Powered, CAT III 1000V With RS Calibration
- N° de stock RS:
- 781-8750
- Référence fabricant:
- VI13800
- Fabricant:
- Martindale
Sous-total (1 unité)*
147,38 €
(TVA exclue)
178,33 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Informations sur le stock actuellement non accessibles
Unité | Prix par unité |
|---|---|
| 1 + | 147,38 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 781-8750
- Référence fabricant:
- VI13800
- Fabricant:
- Martindale
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Martindale | |
| Maximum Voltage | 600V ac/dc | |
| Safety Category | CAT III 1000 V, CAT IV 600V | |
| Display Type | LED | |
| IP Rating | IP54 | |
| Calibrated | RSCAL | |
| Power Source | From Unit Under Test | |
| Dimensions | 205 x 67 x 27mm | |
| Weight | 130g | |
| Height | 27mm | |
| Length | 205mm | |
| Maximum Operating Temperature | +55°C | |
| Safety Category Level | CAT III, CAT IV | |
| Model Number p | VI13800 | |
| Minimum Operating Temperature | -10°C | |
| Safety Category Voltage | 1000 V, 600 V | |
| Width | 67mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Martindale | ||
Maximum Voltage 600V ac/dc | ||
Safety Category CAT III 1000 V, CAT IV 600V | ||
Display Type LED | ||
IP Rating IP54 | ||
Calibrated RSCAL | ||
Power Source From Unit Under Test | ||
Dimensions 205 x 67 x 27mm | ||
Weight 130g | ||
Height 27mm | ||
Length 205mm | ||
Maximum Operating Temperature +55°C | ||
Safety Category Level CAT III, CAT IV | ||
Model Number p VI13800 | ||
Minimum Operating Temperature -10°C | ||
Safety Category Voltage 1000 V, 600 V | ||
Width 67mm | ||
Statut RoHS non applicable
- Pays d'origine :
- PH
Safety Voltage Indicator Without Fuse, VI13800
The Martindale VI13800 is identical to the Martindale VI3700 except that the VI3800 does not have a fuse. This is so that it complies with BS EN61243-3: 2010, which came into effect in May 2013. This standard bans the use of fuses in 2-pole voltage indicators. The VI13800 safety characteristics include retractable prods, cable with an inner cover of different colour (to quickly identify damaged cables) and impedance at both ends to limit current flow if a lead should be broken.
Testing for DC and AC voltage up to 600V
Automatic AC/DC detection
Bright LED indication
Full voltage indication function without batteries
Protective resistor in probe to limit current in event of cable damage
Ergonomic and robust housing
Retractable shrouds
Fully meets GS38 and BE EN61243-3: 2010
Measurement Category CAT IV 600V, CAT III 1000V
Automatic AC/DC detection
Bright LED indication
Full voltage indication function without batteries
Protective resistor in probe to limit current in event of cable damage
Ergonomic and robust housing
Retractable shrouds
Fully meets GS38 and BE EN61243-3: 2010
Measurement Category CAT IV 600V, CAT III 1000V
Standards
BS EN61243-3: 2010
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Liens connexes
- Martindale VI13800 600V ac/dc CAT III 1000V
- John Drummond MTL15 1000V ac/dc CAT IV
- John Drummond MTL15 1000V ac/dc CAT IV With RS Calibration
- Martindale MARVT25 690V ac/dc Battery Powered, CAT III 690V
- Martindale MARVT28 690V ac/dc Battery Powered, CAT III 690V
- Martindale MARVT28 690V ac/dc Battery Powered, CAT III 690V With RS Calibration
- Martindale MARVI-15000 1000V CAT IV
- Weidmuller Car-Check 48V dc From Unit Under Test Powered