Fluke T6-1000 (with Alligator Clips & Soft Case), LCD Voltage tester, 1000V ac/dc, Battery Powered, CAT III 1000V
- N° de stock RS:
- 189-3830
- Référence fabricant:
- T6-1000 KIT2
- Fabricant:
- Fluke
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
390,87 €
(TVA exclue)
472,95 €
(TVA incluse)
- N° de stock RS:
- 189-3830
- Référence fabricant:
- T6-1000 KIT2
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Maximum Voltage | 1000V ac/dc | |
| Safety Category | CAT III 1000 V, CAT IV 600V | |
| Display Type | LCD | |
| IP Rating | IP52 | |
| Battery Type | AA, LR6 | |
| Power Source | Battery | |
| Dimensions | 61.1 x 259.3 x 43.8mm | |
| Weight | 350g | |
| Height | 259.3mm | |
| Length | 61.1mm | |
| Maximum Operating Temperature | +50°C | |
| Safety Category Level | CAT III, CAT IV | |
| Model Number p | T6-1000, AC285, C150 | |
| Minimum Operating Temperature | -10°C | |
| Width | 43.8mm | |
| Safety Category Voltage | 600 V, 1000 V | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Maximum Voltage 1000V ac/dc | ||
Safety Category CAT III 1000 V, CAT IV 600V | ||
Display Type LCD | ||
IP Rating IP52 | ||
Battery Type AA, LR6 | ||
Power Source Battery | ||
Dimensions 61.1 x 259.3 x 43.8mm | ||
Weight 350g | ||
Height 259.3mm | ||
Length 61.1mm | ||
Maximum Operating Temperature +50°C | ||
Safety Category Level CAT III, CAT IV | ||
Model Number p T6-1000, AC285, C150 | ||
Minimum Operating Temperature -10°C | ||
Width 43.8mm | ||
Safety Category Voltage 600 V, 1000 V | ||
- Pays d'origine :
- CN
FLUKE Voltage Tester, FieldSense Technology, LCD Display - T6 Series - T6-1000 KIT2
Keep a close eye on your electrical circuits with this voltage tester from FLUKE. It features innovative FieldSense technology that lets you take voltage measurements up to 1000V through the open fork design without making contact with live conductors. The jaw opens 17.4mm, allowing you to use it with commonly used wire sizes up to 4/0AWG. A handy hold button freezes the display when pressed for ease of viewing and analysis. If you need to take readings on cables, simply attach the included alligator clips and you're set to get testing.
Features & Benefits
• Large LCD screen with a built-in backlight offers a clear display of measured values, even in dark spots
• Light weight of 350g makes it easy to carry around during use
• IP52 rating shows that it's dust-resistant and withstands water sprays less than 15° from vertical
• One-year calibration cycle for accurate performance over the long term
• Light weight of 350g makes it easy to carry around during use
• IP52 rating shows that it's dust-resistant and withstands water sprays less than 15° from vertical
• One-year calibration cycle for accurate performance over the long term
Applications
• Electrical contractors
• Factory maintenance
• Robotics and automation systems
• Factory maintenance
• Robotics and automation systems
How accurate is this voltage tester?
This tester has a voltage measurement accuracy of ±3% at 45 to 66Hz, so you can rest assured you're getting precise results.
Supplied with
Fluke T6-1000 KIT2 Includes 1 x T6-1000 Tester and 1 x FREE AC285 Alligator Clip Set and 1 x FREE C150 Soft Case
Liens connexes
- Fluke T6-1000 1000V CAT III 1000V
- Fluke T6-1000 1000V CAT III 1000V UKAS
- Fluke T6-1000 1000V CAT III 1000V With RS Calibration
- Fluke T6-1000 1000V ac/dc CAT III 1000V
- Fluke T6-1000 Electrical Tester
- Gossen Metrawatt DUSPOL analog 1000 1000V ac/dc Battery Powered, CAT III 1000V
- Gossen Metrawatt DUSPOL expert 1000 1000V ac/dc Battery Powered, CAT III 1000V
- RS PRO 1000V ac/dc CAT III 1000V