Infineon, USB Controller 12 Mbps, 5.5 V, USB, 1.71 V, 28-Pin SSOP
- N° de stock RS:
- 273-2642
- Référence fabricant:
- CY7C65213-28PVXIT
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total (1 unité)*
3,06 €
(TVA exclue)
3,70 €
(TVA incluse)
Ajouter 25 unités pour bénéficier d'une livraison gratuite
En stock
- 86 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 49 | 3,06 € |
| 50 - 99 | 2,60 € |
| 100 - 249 | 2,24 € |
| 250 - 499 | 2,14 € |
| 500 + | 1,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 273-2642
- Référence fabricant:
- CY7C65213-28PVXIT
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Maximum Data Rate | 12Mbps | |
| Product Type | USB Controller | |
| Sub Type | USB Controller | |
| USB Specification | USB 1.1 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 1.71V | |
| Maximum Supply Voltage | 5.5V | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Minimum Operating Temperature | 0°C | |
| Supported Protocols | USB | |
| Maximum Operating Temperature | 70°C | |
| Series | CY7C65213 | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Maximum Data Rate 12Mbps | ||
Product Type USB Controller | ||
Sub Type USB Controller | ||
USB Specification USB 1.1 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 1.71V | ||
Maximum Supply Voltage 5.5V | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 28 | ||
Minimum Operating Temperature 0°C | ||
Supported Protocols USB | ||
Maximum Operating Temperature 70°C | ||
Series CY7C65213 | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
The Infineon USB Controller is a fully integrated USB to UART bridge that provides a simple method to upgrade UART based devices to USB with a minimal number of components. It includes a USB 2.0 full speed controller, a UART transceiver, an internal regulator, an internal oscillator and a 512 byte flash in 28 pin SSOP package. The internal flash is used to store custom specific USB descriptors and GPIO configuration. This is done in system using a configuration utility that communicates over the USB interface.
Data rates up to 3 Mbps
USB suspend mode for low power
Integrated USB termination resistors
Single channel configurable UART interface
Liens connexes
- Infineon CY7C65213-28PVXIT 5.5 V 1.71 V, 28-Pin SSOP
- Infineon 3.6 V USB 3.0 28-Pin SSOP
- Infineon CY7C65213-28PVXI 3.6 V USB 3.0 28-Pin SSOP
- Infineon 1-Channel 12 Mbps USB 32-Pin QFN
- Infineon CY7C65213-32LTXI 1-Channel 12 Mbps USB 32-Pin QFN
- Infineon 5.5 V 1.71 V, 40-Pin VQFN
- Infineon 5.5 V 1.71 V, 24-Pin VQFN
- Infineon CY7C65219-40LQXI 5.5 V 1.71 V, 40-Pin VQFN
