Infineon CY7C65211-24LTXIT, Controller IC 12 Mbps, 5.5 V, USB, 1.71 V, 24-Pin VQFN
- N° de stock RS:
- 273-2639
- Référence fabricant:
- CY7C65211-24LTXIT
- Fabricant:
- Infineon
Sous-total (1 bobine de 2500 unités)*
4 030,00 €
(TVA exclue)
4 877,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 1,612 € | 4 030,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 273-2639
- Référence fabricant:
- CY7C65211-24LTXIT
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Maximum Data Rate | 12Mbps | |
| Product Type | Controller IC | |
| Sub Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | USB 2.0 | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 1.71V | |
| Maximum Supply Voltage | 5.5V | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 24 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | CY7C65211 | |
| Standards/Approvals | USB 2.0-certified | |
| Width | 4 mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Maximum Data Rate 12Mbps | ||
Product Type Controller IC | ||
Sub Type USB Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type USB 2.0 | ||
ESD Protection Yes | ||
Minimum Supply Voltage 1.71V | ||
Maximum Supply Voltage 5.5V | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 24 | ||
Supported Protocols USB | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series CY7C65211 | ||
Standards/Approvals USB 2.0-certified | ||
Width 4 mm | ||
Automotive Standard No | ||
The Infineon USB Controller enables seamless PC connectivity for peripherals with serial interfaces, such as UART, SPI and I2C. It is also integrates CAPSENSE™ and BCD compliant with the USB battery charging specification, Rev. 1.2. It integrates a voltage regulator, an oscillator and flash memory for storing configuration parameters, offering a cost effective solution. It supports bus powered and self powered modes and enables efficient system power management with suspend and remote wake up signals. It is available in a 24 pin QFN package.
Data rates up to 3 Mbps
Full speed USB 2.0 certified
Integrated USB termination resistors
Single channel configurable SPI interface
Single channel configurable UART interface
Liens connexes
- Infineon CY7C65211-24LTXI 3Mbps 5.5 V, 24-Pin QFN
- Infineon CY7C65211-24LTXIT
- Infineon CY7C65213-28PVXIT 12Mbps 1.71 to 5.5 V, 28-Pin SSOP
- Microchip MCP2200-I/MQ 12Mbps 5.5 V, 20-Pin QFN
- Microchip MCP2210-I/MQ 12Mbps 3 → 5.5 V, 20-Pin QFN
- Microchip MCP2210T-I/MQ 12Mbps 3 → 5.5 V, 20-Pin QFN
- Infineon CY7C64215-56LTXC 12Mbps 5.25 V, 56-Pin QFN
- Infineon CY7C68014A-56LTXC 12Mbps 3 to 3.6 V, 56-Pin QFN
