FTDI Chip, Controller IC, 1-Channel 3.4 Mbps, 5.5V, USB 2.0, 5 V, 32-Pin VQFN
- N° de stock RS:
- 196-6429
- Numéro d'article Distrelec:
- 303-96-564
- Référence fabricant:
- FT4222HQ-D-T
- Fabricant:
- FTDI Chip
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 196-6429
- Numéro d'article Distrelec:
- 303-96-564
- Référence fabricant:
- FT4222HQ-D-T
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Maximum Data Rate | 3.4Mbps | |
| Product Type | Controller IC | |
| Number of Transceivers | 1 | |
| Sub Type | Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 5V | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Pin Count | 32 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Length | 5mm | |
| Height | 0.83mm | |
| Standards/Approvals | RoHS | |
| Series | FT4222H | |
| Automotive Standard | No | |
| Supply Current | 80mA | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Maximum Data Rate 3.4Mbps | ||
Product Type Controller IC | ||
Number of Transceivers 1 | ||
Sub Type Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 5V | ||
Mount Type Surface | ||
Package Type VQFN | ||
Pin Count 32 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Length 5mm | ||
Height 0.83mm | ||
Standards/Approvals RoHS | ||
Series FT4222H | ||
Automotive Standard No | ||
Supply Current 80mA | ||
The FT4222H is a High/Full Speed USB2.0-to-Quad SPI/I2C device controller in a compact 32-pin QFN package. The device requires an external crystal at 12MHz in order for the internal PLL to operate. It supports multi-voltage IO: 1.8/2.5 and 3.3V and provides 128 bytes one-time-programmable (OTP) memory space for storing vendor-specific information.
This device contains both SPI and I2C configurable interfaces. The SPI interface can be configured as master mode with single, dual and quad bits data width transfer, or slave mode with single bit data width transfer. The I2C interface can be configured in master or slave mode.
The FT4222H is available in in a space saving Pb-free 32-pin QFN package.
Liens connexes
- FTDI Chip FT4222HQ-D-T 1-Channel 3.4 Mbps USB 2.0 32-Pin VQFN
- FTDI Chip 1-Channel 3.4 Mbps UART USB 2.0 1.8 V, 28-Pin WQFN
- FTDI Chip FT260Q-T 1-Channel 3.4 Mbps UART USB 2.0 1.8 V, 28-Pin WQFN
- FTDI Chip 5.5V 5.5 V, 20-Pin
- FTDI Chip 1-Channel 30 Mbps USB 2.0 56-Pin VQFN
- FTDI Chip 5.5V 5.5 V, 20-Pin QFN
- FTDI Chip 5.5V 5 V, 12-Pin DFN
- FTDI Chip 5.5V 5.5 V, 24-Pin QFN