Microchip, USB Bridge IC, 1-Channel 12 Mbps, 5.5 V, I2C, UART, 3 V, 14-Pin PDIP
- N° de stock RS:
- 171-7828
- Numéro d'article Distrelec:
- 304-37-124
- Référence fabricant:
- MCP2221A-I/P
- Fabricant:
- Microchip
Sous-total (1 paquet de 5 unités)*
14,04 €
(TVA exclue)
16,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 185 unité(s) expédiée(s) à partir du 04 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 2,808 € | 14,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 171-7828
- Numéro d'article Distrelec:
- 304-37-124
- Référence fabricant:
- MCP2221A-I/P
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 12Mbps | |
| Product Type | USB Bridge IC | |
| Number of Transceivers | 1 | |
| Sub Type | Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 5.5V | |
| Mount Type | Through Hole | |
| Package Type | PDIP | |
| Pin Count | 14 | |
| Supported Protocols | I2C, UART | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 19.56mm | |
| Width | 7.11 mm | |
| Series | MCP2221A | |
| Height | 4.83mm | |
| Standards/Approvals | No | |
| Supply Current | 25mA | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 12Mbps | ||
Product Type USB Bridge IC | ||
Number of Transceivers 1 | ||
Sub Type Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 5.5V | ||
Mount Type Through Hole | ||
Package Type PDIP | ||
Pin Count 14 | ||
Supported Protocols I2C, UART | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 19.56mm | ||
Width 7.11 mm | ||
Series MCP2221A | ||
Height 4.83mm | ||
Standards/Approvals No | ||
Supply Current 25mA | ||
Automotive Standard AEC-Q100 | ||
Microchip Technology USB Controller
The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller. Its voltage rating ranges between 3V and 5.5V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is a USB-to-UART/I2C serial converter that enables USB connectivity in applications that have a UART and I2C interfaces.
Features and Benefits
• Bus-powered or self-powered
• Data rate is 12Mbit/s
• Fully configurable VID and PID assignments and string descriptors
• General Purpose Input/Output (GPIO) pins which support clock output, ADC, DAC and interrupt detector
• Highly configurable
• Operating temperature ranges between -40°C and 85°C
• Supports Electrostatic Discharge (ESD) protection
• USB 2.0 compliant
Applications
• Automobile engine control systems
• Electronic devices
• Embedded systems
• Remote control systems
Certifications
• AEC-Q100
Liens connexes
- Microchip MCP2221A-I/P 1-Channel 12 Mbps I2C 3 V, 14-Pin PDIP
- Microchip 1-Channel 12 Mbps I2C 3 V, 14-Pin SOIC
- Microchip MCP2221A-I/SL 1-Channel 12 Mbps I2C 3 V, 14-Pin SOIC
- Microchip 1-Channel 12 Mbps UART 3 V, 14-Pin TSSOP
- Microchip 1-Channel 12 Mbps I2C 3 V, 16-Pin QFN
- Microchip MCP2221A-I/ML 1-Channel 12 Mbps I2C 3 V, 16-Pin QFN
- Microchip MCP2221A-I/ST 1-Channel 12 Mbps UART 3 V, 14-Pin TSSOP
- Infineon 1-Channel 1 Mbps USB SPI 1.71 V, 24-Pin QFN
