Microchip MCP2221A-I/P, USB Bridge IC, 12Mbps, 3 to 5.5 V, 14-Pin PDIP
- N° de stock RS:
- 171-7757
- Référence fabricant:
- MCP2221A-I/P
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total (1 tube de 30 unités)*
70,56 €
(TVA exclue)
85,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 180 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 30 - 90 | 2,352 € | 70,56 € |
| 120 + | 2,15 € | 64,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 171-7757
- Référence fabricant:
- MCP2221A-I/P
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Number of Transceivers | 1 | |
| Data Rate | 12Mbps | |
| IC Type | Controller IC | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 3 to 5.5 V | |
| Mounting Type | Through Hole | |
| Package Type | PDIP | |
| Pin Count | 14 | |
| Dimensions | 0.77 x 0.28 x 0.19in | |
| Height | 4.83mm | |
| Length | 19.56mm | |
| Maximum Operating Temperature | +85 °C | |
| Automotive Standard | AEC-Q100 | |
| Minimum Operating Temperature | -40 °C | |
| Width | 7.11mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Number of Transceivers 1 | ||
Data Rate 12Mbps | ||
IC Type Controller IC | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3 to 5.5 V | ||
Mounting Type Through Hole | ||
Package Type PDIP | ||
Pin Count 14 | ||
Dimensions 0.77 x 0.28 x 0.19in | ||
Height 4.83mm | ||
Length 19.56mm | ||
Maximum Operating Temperature +85 °C | ||
Automotive Standard AEC-Q100 | ||
Minimum Operating Temperature -40 °C | ||
Width 7.11mm | ||
Microchip Technology USB Controller
The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller has a voltage rating ranging between 3V and 5.5V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is a USB-to-UART/I2C serial converter that enables USB connectivity in applications that have a UART and I2C interfaces.
Features and Benefits
• Bus-powered or self-powered
• Data rate is 12Mbit/s
• Fully configurable VID and PID assignments and string descriptors
• General Purpose Input/Output (GPIO) pins which support clock output, ADC, DAC and interrupt detector
• Highly configurable
• Operating temperature ranges between -40°C and 85°C
• Supports Electrostatic Discharge (ESD) protection
• USB 2.0 compliant
• Data rate is 12Mbit/s
• Fully configurable VID and PID assignments and string descriptors
• General Purpose Input/Output (GPIO) pins which support clock output, ADC, DAC and interrupt detector
• Highly configurable
• Operating temperature ranges between -40°C and 85°C
• Supports Electrostatic Discharge (ESD) protection
• USB 2.0 compliant
Applications
• Automobile engine control systems
• Electronic devices
• Embedded systems
• Remote control systems
• Electronic devices
• Embedded systems
• Remote control systems
Certifications
• AEC-Q100
Liens connexes
- Microchip MCP2221A-I/P 12Mbps 14-Pin PDIP
- Microchip MCP2221A-I/SL 12Mbps 14-Pin SOIC
- Microchip MCP2221-I/P 12Mbps 3 to 5.5 V, 14-Pin PDIP
- Microchip MCP2221A-I/ML 12Mbps UART, 16-Pin QFN
- Microchip MCP2221A-I/ST 12Mbps UART, 14-Pin TSSOP
- FTDI Chip FT2233HPQ-TRAY 2-Channel USB 2.0 76-Pin QFN-76
- Microchip MCP2200-I/SS 12Mbps 5.5 V, 20-Pin SSOP
- Microchip MCP2200-I/MQ 12Mbps 5.5 V, 20-Pin QFN