FTDI Chip FT4233HPQ-TRAY, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN
- N° de stock RS:
- 228-3130
- Référence fabricant:
- FT4233HPQ-TRAY
- Fabricant:
- FTDI Chip
Offre groupée disponible
Sous-total (1 unité)*
6,94 €
(TVA exclue)
8,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 512 unité(s) expédiée(s) à partir du 20 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 6,94 € |
| 10 - 99 | 6,76 € |
| 100 + | 6,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 228-3130
- Référence fabricant:
- FT4233HPQ-TRAY
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Product Type | Controller IC | |
| Number of Transceivers | 4 | |
| Maximum Data Rate | 12Mbps | |
| Sub Type | Controller | |
| USB Specification | USB Type C | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 1.32V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 76 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Height | 1mm | |
| Length | 8.85mm | |
| Width | 8.85 mm | |
| Series | FT4233HP | |
| Supply Current | 0.87mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Product Type Controller IC | ||
Number of Transceivers 4 | ||
Maximum Data Rate 12Mbps | ||
Sub Type Controller | ||
USB Specification USB Type C | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 1.32V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 76 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Height 1mm | ||
Length 8.85mm | ||
Width 8.85 mm | ||
Series FT4233HP | ||
Supply Current 0.87mA | ||
Automotive Standard No | ||
The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.
Supports PD Specification 3.0
2 x USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink mode with charging function through to Port 1
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source
Type-C/PD Physical Layer Protocol
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM
PD mode configuration through external EEPROM
Options to use external MCU controlling PD policy through I2C interface
Up to 8 Configurable PD GPIO pins support
External MCU support through I2C bus
External EEPROM support for USB device configuration and PD profile
Liens connexes
- FTDI Chip FT4233HPQ-TRAY 4-Channel USB 2.0 76-Pin QFN-76
- FTDI Chip FT2233HPQ-TRAY 2-Channel USB 2.0 76-Pin QFN-76
- FTDI Chip FT2232HQ-TRAY 12Mbps 64-Pin QFN
- FTDI Chip FT4232HQ-TRAY 12Mbps 64-Pin QFN
- FTDI Chip FT233HPQ-TRAY 12Mbps 3.3 V, 64-Pin QFN 64
- FTDI Chip FT232HPQ-TRAY 12Mbps 3.3 V, 56-Pin QFN 56
- FTDI Chip FT232HQ-TRAY 12Mbps 48-Pin QFN
- FTDI Chip FT2232HPQ-TRAY 2-Channel USB 2.0 68-Pin QFN 68