Bourns TBU-CA025-100-WH 1-Element Bi-Directional TVS Diode, 2-Pin DFN

Offre groupée disponible

Sous-total (1 paquet de 5 unités)*

6,13 €

(TVA exclue)

7,415 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 8 320 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le paquet*
5 - 701,226 €6,13 €
75 - 2451,13 €5,65 €
250 - 4951,036 €5,18 €
500 - 12450,96 €4,80 €
1250 +0,822 €4,11 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
717-3458
Référence fabricant:
TBU-CA025-100-WH
Fabricant:
Bourns
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Bourns

Direction Type

Bi-Directional

Product Type

TVS Diode

Diode Configuration

Single

Mount Type

Surface

Package Type

DFN

Maximum Reverse Stand-off Voltage Vwm

20V

Pin Count

2

ESD Protection

Yes

Minimum Operating Temperature

-55°C

Clamping Voltage VC

250V

Maximum Peak Pulse Current Ippm

0.2A

Maximum Operating Temperature

125°C

Number of Elements per Chip

1

Series

TBU

Standards/Approvals

No

Length

6.5mm

Height

0.85mm

Width

4 mm

Automotive Standard

No

Bourns TBU-CA Series TBU High Speed Protectors


Bourns Transient Blocking Unit (TBU) electronic current limiters (ECL) are circuit protection devices triggered by excessive voltage or current and designed as an optimal circuit protection solution for industrial controls, medical electronics, automated test systems, and military and aerospace applications. They are low capacitance, single bi-directional, high speed, resettable devices which protect - within rated limits - against faults caused by short circuits, AC power cross, induction and lightning surges. Special features include ultra-fast over current protection, in a wide range of trigger currents and voltages, and reduced form factors to save board space. The TBU can be used for protection on Ethernet, RS-485, HART and other ports where dangerous surge and power cross events may occur. It can also be used in telecom applications, providing a barrier to surges while allowing high frequency signals such as VDSL2 to pass through without damage to the circuit. For sensitive electronics applications the TBU eliminates the need for large shunt protection devices by stopping - in less than one microsecond - the damaging currents from reaching protected circuits. The TBU also offers significantly lower let-through energy and overshoot protection, which reduces stress on the PCB for increased reliability and product life. Bourns TBU protection technology limits the energy allowed into sensitive electronics without loading high data rate lines with capacitance. This enables designers to place high performance protection on even their highest bandwidth applications.

Superior circuit protection

Overcurrent and overvoltage protection

Blocks surges up to rated limits

High speed performance

Small SMT package

Operating temperature range -40°C to +125°C

Storage temperature range -65°C to +150°C

Maximum junction temperature +125°C

ESD: IEC 61000-4-2

Surface Mount Technology


Resettable fuses are designed for the protection of electrical and electronic circuits against excessive currents. They switch rapidly from a low resistance to very high resistance state under electrical overload or short circuit conditions, and feature automatic reset and return to low resistance state when fault condition ceases and power is removed.

Maintenance free automatic reset for thousands of cycles

Small size and no fuseholder required

Main applications


Security systems

Power supplies and transformers

Power switching devices

Automotive and medical equipment

Instrumentation and control

Computers and peripherals

Audio visual and telecommunications

Approvals

UL

Liens connexes