STAHLWILLE Torque Tester, 1/4 in Drive, 10 Nm Increment
- N° de stock RS:
- 268-4367
- Référence fabricant:
- 96521086
- Fabricant:
- STAHLWILLE
Sous-total (1 unité)*
4 576,21 €
(TVA exclue)
5 537,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 24 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 4 576,21 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 268-4367
- Référence fabricant:
- 96521086
- Fabricant:
- STAHLWILLE
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STAHLWILLE | |
| Digital | No | |
| Product Type | Torque Tester | |
| Drive Size | 1/4 in | |
| Scale Graduations | 10Nm | |
| Minimum Torque - Nm | 0.2Nm | |
| Maximum Torque - Nm | 10Nm | |
| Standards/Approvals | Class 2 and DKDR 108, DIN 51309 | |
| Sélectionner tout | ||
|---|---|---|
Marque STAHLWILLE | ||
Digital No | ||
Product Type Torque Tester | ||
Drive Size 1/4 in | ||
Scale Graduations 10Nm | ||
Minimum Torque - Nm 0.2Nm | ||
Maximum Torque - Nm 10Nm | ||
Standards/Approvals Class 2 and DKDR 108, DIN 51309 | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Stahlwille Torque Tester, 10Nm Maximum Torque, 0.2Nm Minimum Torque - 96521086
This torque tester is a mechanical instrument designed to measure low-range fastening torque in workshop and production settings. It provides a simple, non-electronic means to assess applied torque for small fasteners and hand tools, suitable for industries where repeatable manual verification is required.
Features and Benefits:
• 1/4in drive size for compatibility with small sockets and bits
• Measurement range 0.2–10Nm for fine torque control
• Class 2 accuracy for consistent repeatability in checks
• Scale graduations matched to 10Nm span for clear reading
• Conforms to DKD-R 108 for recognised calibration protocol
• Meets DIN 51309 standards for torque testing methodology
• Measurement range 0.2–10Nm for fine torque control
• Class 2 accuracy for consistent repeatability in checks
• Scale graduations matched to 10Nm span for clear reading
• Conforms to DKD-R 108 for recognised calibration protocol
• Meets DIN 51309 standards for torque testing methodology
Applications
• Suitable for assembly lines handling miniature fasteners in electronics
• Ideal for maintenance of electrical panels using small torque settings
• Used for verification of hand tools in mechanical workshops
• Can be used for spot checks in automation end-of-line stations
• Ideal for maintenance of electrical panels using small torque settings
• Used for verification of hand tools in mechanical workshops
• Can be used for spot checks in automation end-of-line stations
How is torque indicated without electronics?
Torque is read from a graduated mechanical scale calibrated across the instrument’s measurement span.
What range of fastener sizes is this device aimed at?
The low torque capability supports small screws and bolts commonly found in electronics and precision assemblies.
How does the instrument support calibration traceability?
Its conformity with DKD-R 108 allows calibration against recognised laboratory procedures.
Which industries benefit most from this testing approach?
Sectors requiring repeatable manual torque validation, such as electrical, electronics and light mechanical production, find this format appropriate.