STAHLWILLE Torque Tester, 3/8 in Drive, ±1 % Accuracy, 100 Nm Increment
- N° de stock RS:
- 268-4358
- Référence fabricant:
- 96521022
- Fabricant:
- STAHLWILLE
Sous-total (1 unité)*
2 334,33 €
(TVA exclue)
2 824,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 22 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 334,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 268-4358
- Référence fabricant:
- 96521022
- Fabricant:
- STAHLWILLE
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STAHLWILLE | |
| Product Type | Torque Tester | |
| Digital | No | |
| Drive Size | 3/8 in | |
| Scale Graduations | 100Nm | |
| Accuracy | ±1 % | |
| Minimum Torque - Nm | 2Nm | |
| Maximum Torque - Nm | 100Nm | |
| Standards/Approvals | Can be used as part of a calibration system | |
| Sélectionner tout | ||
|---|---|---|
Marque STAHLWILLE | ||
Product Type Torque Tester | ||
Digital No | ||
Drive Size 3/8 in | ||
Scale Graduations 100Nm | ||
Accuracy ±1 % | ||
Minimum Torque - Nm 2Nm | ||
Maximum Torque - Nm 100Nm | ||
Standards/Approvals Can be used as part of a calibration system | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Stahlwille Transducer, 100Nm Maximum Torque, 2Nm Minimum Torque - 96521022
This transducer converts applied torque into a measurable mechanical signal for use in calibration and measurement contexts within industrial settings. It is intended for torque assessment on tools and machinery where a non-electronic indication is acceptable, and it integrates into calibration workflows to verify torque delivery across a specified working range.
Features and Benefits:
• ±1% accuracy supports precise comparative measurements
• 3/8 inches drive permits use with common torque tools
• Measures from 2Nm to 100Nm for broad task coverage
• Non-digital mechanical output simplifies integration into rigs
• Suitable for inclusion in calibration systems for verification
• 3/8 inches drive permits use with common torque tools
• Measures from 2Nm to 100Nm for broad task coverage
• Non-digital mechanical output simplifies integration into rigs
• Suitable for inclusion in calibration systems for verification
Applications
• Suitable for bench calibration of hand torque wrenches
• Ideal for verification tasks in manufacturing test rigs
• Used for routine torque checks in maintenance departments
• Can be used for torque auditing in assembly lines
• Ideal for verification tasks in manufacturing test rigs
• Used for routine torque checks in maintenance departments
• Can be used for torque auditing in assembly lines
What torque range can it assess reliably?
It operates across a minimum of 2Nm up to a maximum of 100Nm, enabling checks from low-torque assemblies to heavier fastening tasks.
How does the drive Interface with existing tools?
The 3/8 inches drive accepts standard sockets and adaptors, allowing direct connection to common torque tools and test fixtures.
Is the device compatible with calibration procedures?
Yes, it is designed to be employed as part of a calibration system to corroborate torque outputs during comparative testing.
Does the transducer produce electronic data?
No, it provides a mechanical, non-digital measurement output suitable for setups that do not require electronic signalling.
Liens connexes
- STAHLWILLE Torque Tester ± 1 % Accuracy, 200 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 10 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 400 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 100 Nm Increment
- STAHLWILLE Digital Torque Tester 1 % Accuracy
- STAHLWILLE Torque Tester 0.25% from measured value Accuracy, 20 Nm Increment
- STAHLWILLE Torque Tester 20 Nm Increment
- STAHLWILLE Torque Tester 1100 Nm Increment