Wera Adjustable Torque Screwdriver, 0.3 → 1.2Nm, 1/4 in Drive, ESD Safe, ±6 % Accuracy - With RS Calibration
- N° de stock RS:
- 243-4210
- Référence fabricant:
- 074730
- Fabricant:
- Wera
Sous-total (1 unité)*
252,85 €
(TVA exclue)
305,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 17 unité(s) prête(s) à être expédiée(s)
- Plus 70 unité(s) expédiée(s) à partir du 13 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 252,85 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 243-4210
- Référence fabricant:
- 074730
- Fabricant:
- Wera
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Wera | |
| Torque Range | 0.3 → 1.2Nm | |
| Type | Adjustable | |
| Drive Size | 1/4 in | |
| ESD Safe | Yes | |
| Overall Length | 155 mm | |
| Accuracy | ±6 % | |
| Calibrated | RSCAL | |
| Sélectionner tout | ||
|---|---|---|
Marque Wera | ||
Torque Range 0.3 → 1.2Nm | ||
Type Adjustable | ||
Drive Size 1/4 in | ||
ESD Safe Yes | ||
Overall Length 155 mm | ||
Accuracy ±6 % | ||
Calibrated RSCAL | ||
Statut RoHS non applicable
- Pays d'origine :
- CZ
Wera Torque Screwdriver, Quick-Release Chuck, 155mm Blade Length - Kraftform 7400 ESD Series - 05074730001
When it comes to precision tightening, this torque screwdriver from Wera works a treat. Thanks to the adjustable torque setting, you can be sure you're applying just the right amount of force to your screws. This helps prevent damage from over or under-tightening. Simply twist the tool's handle until it meets the torque value you need on the scale, and you're good to go. For maximum accuracy, you can adjust the torque in 0.05Nm increments in a wide range of 0.3 to 1.2Nm.
Features & Benefits
• Hexagonal anti-rolling design means it stays put when you set it down
• Ergonomic Kraftform handle fits comfortably in your hand
• Rapidaptor quick-release chuck makes it a cinch to change bits
• Ergonomic Kraftform handle fits comfortably in your hand
• Rapidaptor quick-release chuck makes it a cinch to change bits
Applications
• Production and manufacturing
• Maintenance and repairs
• Maintenance and repairs
Is this product suitable for use with sensitive electronic components?
Yes, this tool has a surface resistance of one billion ohms, so it's ESD-safe to prevent interference with electronic devices.
Liens connexes
- Wera Adjustable Torque Screwdriver 1/4'' Drive ±6 % Accuracy
- Wera Adjustable Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy - With RS Calibration
- Wera Adjustable Hex Torque Screwdriver 9 mm Drive, ±6 % Accuracy
- Wera Adjustable Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy
- Wera Pre-Settable Hex Torque Screwdriver 1/4 in Drive ±6 % Accuracy
- Wera Adjustable Halfmoon 0.3 → 1Nm ESD Safe, ±6 % Accuracy
- Wera Adjustable Hex Torque Screwdriver 1/4 in Drive ±6 % Accuracy
- Wera Pre-Settable Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy