Wera Adjustable Halfmoon, HIOS Torque Screwdriver, 0.1 → 0.34Nm, 4 mm Drive, ESD Safe, ±6 % Accuracy
- N° de stock RS:
- 123-1845
- Référence fabricant:
- 05074826001
- Fabricant:
- Wera
Sous-total (1 unité)*
162,30 €
(TVA exclue)
196,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 15 unité(s) prête(s) à être expédiée(s)
- Plus 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 162,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 123-1845
- Référence fabricant:
- 05074826001
- Fabricant:
- Wera
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Wera | |
| Torque Range | 0.1 → 0.34Nm | |
| Type | Adjustable | |
| Drive Shape | Halfmoon, HIOS | |
| Drive Size | 4 mm | |
| ESD Safe | Yes | |
| Overall Length | 138 mm | |
| Accuracy | ±6 % | |
| Sélectionner tout | ||
|---|---|---|
Marque Wera | ||
Torque Range 0.1 → 0.34Nm | ||
Type Adjustable | ||
Drive Shape Halfmoon, HIOS | ||
Drive Size 4 mm | ||
ESD Safe Yes | ||
Overall Length 138 mm | ||
Accuracy ±6 % | ||
Statut RoHS : Exempté
- Pays d'origine :
- CZ
Serie 7400 ESD Kraftform pre-set adjustable torque screwdrivers (0.1-1.0 Nm) with quick-release chuck
Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21).
Please note: 1 Ncm = 0.01 Nm.
Factory pre-set, adjustable Kraftform ESD torque screwdriver
ESD-safe tool thanks to surface resistance of ≤ 10^9 Ohm
Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive
Distinct audible and perceivable excess load signal when the pre-set torque value is reached
Kraftform handle for fast and ergonomic screwdriving
Serie 7400 ESD Kraftform pre-set adjustable torque screwdrivers (0.1-1.0 Nm) with quick-release chuck, 7455 ESD x 0.1 Nm x 0.1-0.34 Nm
Liens connexes
- Wera Adjustable Halfmoon 0.1 → 0.34Nm ESD Safe, ±6 % Accuracy
- Wera Adjustable Halfmoon 0.05 → 0.11Nm ESD Safe, ±10 % Accuracy
- Wera Adjustable Halfmoon 0.3 → 1Nm ESD Safe, ±6 % Accuracy
- Wera Adjustable Halfmoon 0.02 → 0.06Nm ESD Safe, ±10 % Accuracy
- Wera Adjustable Halfmoon 0.30 → 1Nm, 142 mm Drive
- Wera Adjustable Hex Torque Screwdriver 1/4 in Drive ±6 % Accuracy
- Wera Adjustable Hex Torque Screwdriver 1/4 in Drive, ±6 % Accuracy
- Wera Adjustable Torque Screwdriver 1/4'' Drive ±6 % Accuracy