RS PRO Toggle Switch, PCB Mount, On-Off-(On), DPDT, Solder Terminal
- N° de stock RS:
- 820-0514
- Fabricant:
- RS PRO
Offre groupée disponible
Sous-total (1 unité)*
14,40 €
(TVA exclue)
17,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 124 unité(s) expédiée(s) à partir du 23 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 14,40 € |
| 10 - 24 | 13,11 € |
| 25 - 49 | 11,70 € |
| 50 - 99 | 10,27 € |
| 100 + | 8,80 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 820-0514
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Contact Configuration | DPDT | |
| Switch Operation | On-Off-(On) | |
| Contact Current Rating | 5 A @ 250 V ac | |
| Mounting Type | PCB | |
| Terminal Type | Solder | |
| IP Rating | IP67 | |
| Actuator Length | 18mm | |
| Actuator Material | Brass | |
| Contact Resistance | 10mΩ | |
| Contact Material | Silver | |
| Operating Temperature Range | -30 → +85°C | |
| Minimum Operating Temperature | -30°C | |
| Standards Met | MIL-STD-202F | |
| Mechanical Life | 50000Cycles | |
| Maximum Operating Temperature | +85°C | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Contact Configuration DPDT | ||
Switch Operation On-Off-(On) | ||
Contact Current Rating 5 A @ 250 V ac | ||
Mounting Type PCB | ||
Terminal Type Solder | ||
IP Rating IP67 | ||
Actuator Length 18mm | ||
Actuator Material Brass | ||
Contact Resistance 10mΩ | ||
Contact Material Silver | ||
Operating Temperature Range -30 → +85°C | ||
Minimum Operating Temperature -30°C | ||
Standards Met MIL-STD-202F | ||
Mechanical Life 50000Cycles | ||
Maximum Operating Temperature +85°C | ||
- Pays d'origine :
- TW
IP67 Sealed Miniature Toggle Switches - RS Series
These full sealed switches feature a double shell case for added mechanical strength and high electrical insulation. The switches have a two 'O' ring frontal seals that maintain the seal during operation. The rear of the switch is also fully sealed allowing full protection from flowing water.The contacts are suitable for both low level switching (10mA 50mV - 10μA, 5Vdc minimum) and power applications (3A @ 250Vac).
Liens connexes
- RS PRO Toggle Switch (On)-Off-(On) Solder Terminal
- RS PRO Toggle Switch On-Off-On Solder Terminal
- RS PRO Toggle Switch (On)-Off-On Solder Terminal
- RS PRO Toggle Switch On-Off-On Solder Terminal
- RS PRO Toggle Switch (On)-Off-(On) Solder Terminal
- RS PRO Toggle Switch On-Off-On Solder Lug Terminal
- RS PRO Toggle Switch (On)-Off-(On) Screw Terminal
- RS PRO Toggle Switch On-Off-On Screw Terminal