KNITTER-SWITCH Toggle Switch, PCB Mount, On-On, SPDT, Through Hole Terminal, 28 V dc
- N° de stock RS:
- 819-9448
- Référence fabricant:
- FT 1 D
- Fabricant:
- KNITTER-SWITCH
Visuel non contractuel
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 819-9448
- Référence fabricant:
- FT 1 D
- Fabricant:
- KNITTER-SWITCH
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | KNITTER-SWITCH | |
| Contact Configuration | SPDT | |
| Product Type | Toggle Switch | |
| Switch Operation | On-On | |
| Switch Contact Current | 400mA | |
| Mount Type | PCB | |
| Terminal Type | Through Hole | |
| Contact DC Voltage | 28V dc | |
| Actuator Length | 3.8mm | |
| Minimum Operating Temperature | -40°C | |
| Switch Configuration | SPDT, DPDT | |
| Actuator Material | Polyester | |
| Maximum Operating Temperature | 85°C | |
| Length | 10.25mm | |
| Width | 7mm | |
| Standards/Approvals | RoHS | |
| Height | 10.8mm | |
| Series | FT | |
| Mechanical Life | 30000Operations | |
| Sélectionner tout | ||
|---|---|---|
Marque KNITTER-SWITCH | ||
Contact Configuration SPDT | ||
Product Type Toggle Switch | ||
Switch Operation On-On | ||
Switch Contact Current 400mA | ||
Mount Type PCB | ||
Terminal Type Through Hole | ||
Contact DC Voltage 28V dc | ||
Actuator Length 3.8mm | ||
Minimum Operating Temperature -40°C | ||
Switch Configuration SPDT, DPDT | ||
Actuator Material Polyester | ||
Maximum Operating Temperature 85°C | ||
Length 10.25mm | ||
Width 7mm | ||
Standards/Approvals RoHS | ||
Height 10.8mm | ||
Series FT | ||
Mechanical Life 30000Operations | ||
- Pays d'origine :
- CN
Knitter Switch Microminiature Toggle Switches - FT Series
The FT toggle switch series are micro miniature devices take up just 4.5 mm x 7 mm of PCB space. Available in single or double pole versions, typical applications include medical devices and test and measurement equipment.
ESD resistance: > 8 kV ( between lever and terminals )
Maximum contact rating; 0,4 VA at 28 V dc
Liens connexes
- KNITTER-SWITCH Toggle Switch On-On Through Hole Terminal, 28 V dc
- KNITTER-SWITCH Toggle Switch On-Off-On Through Hole Terminal, 48 V ac
- KNITTER-SWITCH Toggle Switch On-On Through Hole Terminal, 250 V ac
- KNITTER-SWITCH Toggle Switch On-On Through Hole Terminal 20 V ac
- KNITTER-SWITCH Toggle Switch (On)-On Through Hole Terminal 48 V ac
- KNITTER-SWITCH Toggle Switch (On)-On Through Hole Terminal 20 V ac
- KNITTER-SWITCH Toggle Switch (On)-On Through Hole Terminal 48 V ac
- NKK Switches Toggle Switch On-On Through Hole Terminal 28 V ac