TE Connectivity Toggle Switch, Panel Mount, On-On, DPDT, Solder Terminal, 250V
- N° de stock RS:
- 316-989
- Référence fabricant:
- FTN0904
- Fabricant:
- TE Connectivity
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 316-989
- Référence fabricant:
- FTN0904
- Fabricant:
- TE Connectivity
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TE Connectivity | |
| Contact Configuration | DPDT | |
| Switch Operation | On-On | |
| Contact Current Rating | 4 A @ 30 V dc | |
| Mounting Type | Panel Mount | |
| Terminal Type | Solder | |
| Panel Cut Out Diameter | 6.2mm | |
| Actuator Length | 10.5mm | |
| Actuator Material | Chrome Plated Brass | |
| Voltage Rating | 250V | |
| Contact Material | Fine Silver | |
| Contact Resistance | 0.01Ω | |
| Standards Met | CSA Recognised, RoHS, UL 94V-0 | |
| Maximum Operating Temperature | +80°C | |
| Mechanical Life | 100000Operations | |
| Operating Temperature Range | -20 → +80°C | |
| Minimum Operating Temperature | -20°C | |
| Sélectionner tout | ||
|---|---|---|
Marque TE Connectivity | ||
Contact Configuration DPDT | ||
Switch Operation On-On | ||
Contact Current Rating 4 A @ 30 V dc | ||
Mounting Type Panel Mount | ||
Terminal Type Solder | ||
Panel Cut Out Diameter 6.2mm | ||
Actuator Length 10.5mm | ||
Actuator Material Chrome Plated Brass | ||
Voltage Rating 250V | ||
Contact Material Fine Silver | ||
Contact Resistance 0.01Ω | ||
Standards Met CSA Recognised, RoHS, UL 94V-0 | ||
Maximum Operating Temperature +80°C | ||
Mechanical Life 100000Operations | ||
Operating Temperature Range -20 → +80°C | ||
Minimum Operating Temperature -20°C | ||
Toggle Switches, Min, Professional
Note
Care should be taken when soldering not to overheat the switch assembly
For biased switches '(on)' refers to momentary 'on' position
For biased switches '(on)' refers to momentary 'on' position
Approvals
CSA


Approvals
CSA
Liens connexes
- TE Connectivity Toggle Switch On-On Through Hole Terminal, 250V
- TE Connectivity Toggle Switch On-On Solder Terminal, 250V
- TE Connectivity Toggle Switch On-Off-On Solder Terminal, 250V
- NKK Switches Toggle Switch On-(On) Solder Terminal, 250V ac
- KNITTER-SWITCH Toggle Switch On-On Solder Terminal, 250V ac
- TE Connectivity Toggle Switch On-On Solder Terminal
- TE Connectivity Toggle Switch On-(On) Solder Terminal
- NKK Switches Toggle Switch On-Off-On Solder Terminal, 250V ac
