Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	P.M.A
	Output Type	Relay
	Supply Voltage	90 → 250 V ac
	Size	96 x 48 (1/8 DIN)mm
	Number of Outputs	2
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	+65°C
	Temperature Range	0 → +1760 (Type R Thermocouple) °C, 0 → +1760 (Type S Thermocouple) °C, -100 → +1200 (Type J Thermocouple) °C, -100 → +1300 (Type N Thermocouple) °C, -100 → +1350 (Type K Thermocouple) °C, -100 → +900 (Type L Thermocouple) °C, -200 → +200 (PT1000) °C, -200 → +850 (PT100) °C, -50 → +150 (KTY 11-6) °C
	Control Type	ON/OFF
	Display Type	LED, Multi Line
	IP Rating	IP00, IP20, IP65
	Range	PMA KS50-1
	Additional Functionality	ON/OFF
	Series	KS50
	Panel Depth	118mm

	Sélectionner tout
	Marque P.M.A
	Output Type Relay
	Supply Voltage 90 → 250 V ac
	Size 96 x 48 (1/8 DIN)mm
	Number of Outputs 2
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature +65°C
	Temperature Range 0 → +1760 (Type R Thermocouple) °C, 0 → +1760 (Type S Thermocouple) °C, -100 → +1200 (Type J Thermocouple) °C, -100 → +1300 (Type N Thermocouple) °C, -100 → +1350 (Type K Thermocouple) °C, -100 → +900 (Type L Thermocouple) °C, -200 → +200 (PT1000) °C, -200 → +850 (PT100) °C, -50 → +150 (KTY 11-6) °C
	Control Type ON/OFF
	Display Type LED, Multi Line
	IP Rating IP00, IP20, IP65
	Range PMA KS50-1
	Additional Functionality ON/OFF
	Series KS50
	Panel Depth 118mm

Statut RoHS non applicable

Pays d'origine :: DE

PMA KS 50-1 Temperature Controller

The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.

The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.

The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.

• Universal continuous/switching version, i.e. reduced stocks
• 100ms cycle time, i.e. also suitable for fast control loops
• 20ms as shortest pulse for very fast / strong actuators
• Freely configurable analog output, e.g. as process value output
• Customer-specific linearisation for all sensors
• Settings can be blocked via password and internal switch for high security
• Extended temperature range up to 60 °C allows mounting close to the process
• Easy 2-point or offset measurement correction
• Emergency operation after sensor break by means of the "output hold" function
• Logical combination of digital outputs, e.g. for general alarm
• Programmer with 10 segments and "end" signal
• RS 422/485 Modbus RTU interface
• Built-in transmitter power supply
• Splash-water proof front (IP65)

Supplied with

German Manual

PMA Temperature Controllers

P.M.A KS50 PID Temperature Controller, 96 x 48 (1/8 DIN)mm, 2 Output Relay, 90 → 250 V ac Supply Voltage ON/OFF

Frais de livraison offerts pour toute commande de plus de 75,00 €

PMA KS 50-1 Temperature Controller

Supplied with

Liens connexes