P.M.A KS50 PID Temperature Controller, 48 x 96mm, 3 Output, 90 → 250 V ac Supply Voltage
- N° de stock RS:
- 418-5111
- Référence fabricant:
- KS50-102-0000D-011
- Fabricant:
- P.M.A
Visuel non contractuel
Sous-total (1 unité)*
592,37 €
(TVA exclue)
716,77 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 592,37 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 418-5111
- Référence fabricant:
- KS50-102-0000D-011
- Fabricant:
- P.M.A
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | P.M.A | |
| Supply Voltage | 90 → 250 V ac | |
| Size | 48 x 96mm | |
| Number of Outputs | 3 | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | +65°C | |
| Series | KS50 | |
| Range | E5CC | |
| Input Type | Current, Resistance Transducer, Thermocouple, Voltage | |
| Panel Depth | 118mm | |
| Sélectionner tout | ||
|---|---|---|
Marque P.M.A | ||
Supply Voltage 90 → 250 V ac | ||
Size 48 x 96mm | ||
Number of Outputs 3 | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature +65°C | ||
Series KS50 | ||
Range E5CC | ||
Input Type Current, Resistance Transducer, Thermocouple, Voltage | ||
Panel Depth 118mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
PMA KS 50-1 Temperature Controller
The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.
The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.
The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.
The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.
The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.
• Universal continuous/switching version, i.e. reduced stocks
• 100ms cycle time, i.e. also suitable for fast control loops
• 20ms as shortest pulse for very fast / strong actuators
• Freely configurable analog output, e.g. as process value output
• Customer-specific linearisation for all sensors
• Settings can be blocked via password and internal switch for high security
• Extended temperature range up to 60 °C allows mounting close to the process
• Easy 2-point or offset measurement correction
• Emergency operation after sensor break by means of the "output hold" function
• Logical combination of digital outputs, e.g. for general alarm
• Programmer with 10 segments and "end" signal
• RS 422/485 Modbus RTU interface
• Built-in transmitter power supply
• Splash-water proof front (IP65)
• 100ms cycle time, i.e. also suitable for fast control loops
• 20ms as shortest pulse for very fast / strong actuators
• Freely configurable analog output, e.g. as process value output
• Customer-specific linearisation for all sensors
• Settings can be blocked via password and internal switch for high security
• Extended temperature range up to 60 °C allows mounting close to the process
• Easy 2-point or offset measurement correction
• Emergency operation after sensor break by means of the "output hold" function
• Logical combination of digital outputs, e.g. for general alarm
• Programmer with 10 segments and "end" signal
• RS 422/485 Modbus RTU interface
• Built-in transmitter power supply
• Splash-water proof front (IP65)
PMA Temperature Controllers
Liens connexes
- P.M.A KS90 PID Temperature Controller 2 Output, 90 → 250 V ac Supply Voltage
- P.M.A KS41 PID Temperature Controller 3 Output, 90 → 250 V ac Supply Voltage
- P.M.A KS50 PID Temperature Controller 2 Output Relay, 90 → 250 V ac Supply Voltage ON/OFF
- P.M.A KS90 PID Temperature Controller 4 Output, 90 → 250 V ac Supply Voltage
- P.M.A KS90 PID Temperature Controller 1 Output, 90 → 250 V ac Supply Voltage
- P.M.A KS42 PID Temperature Controller 3 Output, 90 → 250 V ac Supply Voltage
- P.M.A KS40 PID Temperature Controller 3 Output, 90 → 250 V ac Supply Voltage
- P.M.A D280-1 Temperature Indicator 90 → 250 V ac Supply Voltage