Murata Power Solutions Switching Regulator, Through Hole, 5V dc Output Voltage, 1.5A Output Current, 1 Outputs

Voir la catégorie
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
Options de conditionnement :

Produit de remplacement

Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:

presentation
Murata Power Solutions Switching Regulator, Through Hole, 5V dc Output Voltage, 1.5A Output Current, 1 Outputs
N° de stock RS
796-2132

la pièce

4,87 €

(TVA exclue)

5,89 €

(TVA incluse)

N° de stock RS:
796-2138
Référence fabricant:
OKI-78SR-5/1.5-W36H-C
Fabricant:
Murata Power Solutions
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Murata Power Solutions

Output Voltage

5V dc

Output Current

1.5A

Mounting Type

Through Hole

Number of Outputs

1

Package

SIP

Power Rating

7.5W

Efficiency

90.5%

Ripple And Noise

75mV Pk-Pk

Minimum Temperature

-40°C

Maximum Temperature

+85°C

Series

OKI-78SR

Line Regulation

±0.25%

Width

7.6mm

Weight

2g

Depth

16.5mm

Length

10.4mm

Load Regulation

±0.25%

Pays d'origine :
CN

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series


The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits


Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Murata Power Solutions Non-Isolated DC-DC Converter


The Murata Power Solutions Non-Isolated DC-DC converter is used for the embedded application. It has three nominal output voltage terminals and up to 1.5A is the maximum output. The ultra-wide input range of upto 12VDC. Based on fixed frequency the high efficiency means very low heat and low electrical noise requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators hence no extra outside component is required

Features and Benefits


• High efficiency with no external components
• No heat sink direct replacement for 3-terminal
• Operating temperature is from -40°Cto 85°C
• Outstanding thermal derating performance
• Short circuit protection
• Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications


• Control boxes
• Control boxes
• ITE commercials
• ITE commercials

Certifications


• UL certified

Liens connexes