STMicroelectronics Buck Converter, Surface Mount, 38V Output Voltage, 2 A Output Current, 1 Outputs
- N° de stock RS:
- 225-0014
- Référence fabricant:
- L6986ITR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Sous-total (1 paquet de 5 unités)*
14,04 €
(TVA exclue)
16,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 495 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 20 | 2,808 € | 14,04 € |
| 25 - 45 | 2,668 € | 13,34 € |
| 50 - 120 | 2,40 € | 12,00 € |
| 125 - 245 | 2,16 € | 10,80 € |
| 250 + | 2,052 € | 10,26 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 225-0014
- Référence fabricant:
- L6986ITR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Buck Converter | |
| Output Voltage 1 | 38V | |
| Output Current | 2A | |
| Mount Type | Surface Mount | |
| Number of Outputs | 1 | |
| Power | 5W | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Output Voltage 2 | 0.6V | |
| Number of Pins | 16 | |
| Series | L6986L | |
| Package Type | HTSSOP-16 | |
| Depth | 1.2mm | |
| Length | 5.1mm | |
| Width | 6.6mm | |
| Standards/Approvals | No | |
| Maximum Input Voltage | 38V | |
| Minimum Input Voltage | 4V | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Buck Converter | ||
Output Voltage 1 38V | ||
Output Current 2A | ||
Mount Type Surface Mount | ||
Number of Outputs 1 | ||
Power 5W | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Output Voltage 2 0.6V | ||
Number of Pins 16 | ||
Series L6986L | ||
Package Type HTSSOP-16 | ||
Depth 1.2mm | ||
Length 5.1mm | ||
Width 6.6mm | ||
Standards/Approvals No | ||
Maximum Input Voltage 38V | ||
Minimum Input Voltage 4V | ||
The STMicroelectronics 5 W synchronous iso-buck converter is a device specifically designed for the isolated buck topology. Due to the P-Channel MOSFET as high-side power switch the device features 100% duty cycle operation. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary sink capability up to 1.9 A (even during softstart) allows a proper energy transfer to the secondary side as well as enables a tracked soft-start of the secondary output.
Designed for iso-buck topology
4 V to 38 V operating input voltage
Primary output voltage regulation / no optocoupler required
1.9 A typical sink Peak primary current capability
Peak current mode architecture in forced PWM operation
300 ns blanking time