STMicroelectronics Buck Converter, Surface Mount, 38V Output Voltage, 2 A Output Current, 1 Outputs
- N° de stock RS:
- 225-0009P
- Référence fabricant:
- A6986ITR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Sous-total 10 unités (conditionné en bande continue)*
35,00 €
(TVA exclue)
42,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 474 unité(s) expédiée(s) à partir du 25 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 18 | 3,50 € |
| 20 - 48 | 3,155 € |
| 50 - 98 | 2,84 € |
| 100 + | 2,81 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 225-0009P
- Référence fabricant:
- A6986ITR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Output Voltage 1 | 38V | |
| Product Type | Buck Converter | |
| Output Current | 2A | |
| Mount Type | Surface Mount | |
| Number of Outputs | 1 | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Number of Pins | 16 | |
| Series | A6986 | |
| Package Type | HTSSOP-16 | |
| Standards/Approvals | RoHS, AEC-Q100 | |
| Depth | 1.2mm | |
| Width | 6.6mm | |
| Length | 5.1mm | |
| Maximum Input Voltage | 40V | |
| Minimum Input Voltage | 4V | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Output Voltage 1 38V | ||
Product Type Buck Converter | ||
Output Current 2A | ||
Mount Type Surface Mount | ||
Number of Outputs 1 | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Number of Pins 16 | ||
Series A6986 | ||
Package Type HTSSOP-16 | ||
Standards/Approvals RoHS, AEC-Q100 | ||
Depth 1.2mm | ||
Width 6.6mm | ||
Length 5.1mm | ||
Maximum Input Voltage 40V | ||
Minimum Input Voltage 4V | ||
The STMicroelectronics 5 W synchronous iso-buck converter is an automotive grade device specifically designed for the isolated buck topology. The 100% duty cycle capability and the wide input voltage range meet the cold crank and load dump specifications for automotive systems. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary sink capability typically up to 1.9 A (even during soft-start) allows a proper energy transfer to the secondary side as well as enabling a tracked soft-start of the secondary output.
AEC-Q100 Grade 1 qualified
Designed for iso-buck topology
4 V to 38 V operating input voltage
Primary output voltage regulation / no optocoupler required
1.9 A typical sink Peak primary current capability
Peak current mode architecture in forced PWM operation
300 ns blanking time