TRACOPOWER Switching Regulator, Through Hole, 3.3V dc Output Voltage, 4.75 → 36V dc Input Voltage, 2A Output

N° de stock RS:: 161-6752
Référence fabricant:: TSR 2-2433
Fabricant:: TRACOPOWER

TRACOPOWER Switching Regulator, Through Hole, 3.3V dc Output Voltage, 4.75 → 36V dc Input Voltage, 2A Output

Offre groupée disponible

Sous-total (1 tube de 10 unités)*

109,96 €

(TVA exclue)

133,05 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

14 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 7 unité(s) expédiée(s) à partir du 09 janvier 2026
Plus 22 unité(s) expédiée(s) à partir du 29 janvier 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Tube(s)	le tube	Prix par unité*
1 - 4	109,96 €	10,996 €
5 - 9	106,67 €	10,667 €
10 - 24	103,36 €	10,336 €
25 - 49	98,96 €	9,896 €
50 +	94,56 €	9,456 €

*Prix donné à titre indicatif

N° de stock RS:: 161-6752
Référence fabricant:: TSR 2-2433
Fabricant:: TRACOPOWER

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	TRACOPOWER
	Output Voltage	3.3V dc
	Output Current	2A
	Input Voltage	4.75 → 36V dc
	Mounting Type	Through Hole
	Number of Outputs	1
	Package	SIP
	Efficiency	91%
	Ripple And Noise	50mV Pk-Pk
	Maximum Temperature	+85°C
	Minimum Temperature	-40°C
	Series	TSR 2
	Line Regulation	Maximum of 0.5%
	Protection Features	Over Temperature Protection, Overload Protection, Short Circuit Protection
	Width	7.5mm
	Load Regulation	Maximum of 1%
	Special Features	High Efficiency, Low Standby Power
	Power Signal Conversion Type	DC-DC
	Rated Output Power	2W
	MTBF	13520000h
	Weight	2.6g
	Application	Industrial Electronics, IT
	Maximum Input Current	1mA
	Depth	10.1mm
	Length	14mm
	Standards Met	IEC/EN 60950-1, MIL-STD-810F, UL 60950-1, UL 94 V-0
	Switching Frequency Range	410kHz

	Sélectionner tout
	Marque TRACOPOWER
	Output Voltage 3.3V dc
	Output Current 2A
	Input Voltage 4.75 → 36V dc
	Mounting Type Through Hole
	Number of Outputs 1
	Package SIP
	Efficiency 91%
	Ripple And Noise 50mV Pk-Pk
	Maximum Temperature +85°C
	Minimum Temperature -40°C
	Series TSR 2
	Line Regulation Maximum of 0.5%
	Protection Features Over Temperature Protection, Overload Protection, Short Circuit Protection
	Width 7.5mm
	Load Regulation Maximum of 1%
	Special Features High Efficiency, Low Standby Power
	Power Signal Conversion Type DC-DC
	Rated Output Power 2W
	MTBF 13520000h
	Weight 2.6g
	Application Industrial Electronics, IT
	Maximum Input Current 1mA
	Depth 10.1mm
	Length 14mm
	Standards Met IEC/EN 60950-1, MIL-STD-810F, UL 60950-1, UL 94 V-0
	Switching Frequency Range 410kHz

Datasheet

Se connecter pour voir les modèles CAO

Pays d'origine :: TW

Traco Power Switching Regulator, 91% Efficiency, 1 Output - TSR 2 Series - TSR 2-2433

Place the trust of your power management into the hands of this switching regulator from Traco Power. Its tight load regulation levels off your power supply at a stable 3.3V DC, so there's minimal chance of equipment receiving too much or too little energy. This helps to keep your device running reliably and efficiently. Compact dimensions of 14 (L) x 7.5 (W) x 10.1mm (D) mean you can make maximum use of PCB real estate. An efficiency of 91% lets you operate this regulator at full load in ambient conditions of up to +67°C without needing any forced cooling.

Features & Benefits

• Non-conductive plastic casing offers protection from electric shock
• MTBF of over 13 million hours for reliability throughout its extended service life
• Built-in filter capacitor, which protects against ripple and noise interference
• Resists shock and vibration, so suitable to use in demanding environments

Applications

• Battery-operated equipment
• Industrial electronics
• Data acquisition centres
• Hospitals

Does this regulator protect against power surges?

Yes, the unit includes short-circuit and overvoltage protections, helping to prevent power faults from causing damage to equipment.