Power Integrations Buck Converter, Through Hole, 700 V Output Voltage, 80 mA Output Current, 1 Outputs
- N° de stock RS:
- 146-5618
- Référence fabricant:
- LNK302PN
- Fabricant:
- Power Integrations
Sous-total (1 tube de 50 unités)*
29,70 €
(TVA exclue)
35,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 100 unité(s) expédiée(s) à partir du 11 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 50 + | 0,594 € | 29,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 146-5618
- Référence fabricant:
- LNK302PN
- Fabricant:
- Power Integrations
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Power Integrations | |
| Product Type | Buck Converter | |
| Output Voltage 1 | 700 V | |
| Output Current | 80mA | |
| Mount Type | Through Hole | |
| Number of Outputs | 1 | |
| Efficiency | 75% | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Number of Pins | 8 | |
| Output Voltage 2 | -0.3V | |
| Series | LNK302 | |
| Package Type | DIP-B | |
| Depth | 6.6mm | |
| Length | 9.83mm | |
| Width | 3.68 mm | |
| Standards/Approvals | RoHS | |
| Maximum Input Voltage | 265V ac | |
| Minimum Input Voltage | 85V ac | |
| Sélectionner tout | ||
|---|---|---|
Marque Power Integrations | ||
Product Type Buck Converter | ||
Output Voltage 1 700 V | ||
Output Current 80mA | ||
Mount Type Through Hole | ||
Number of Outputs 1 | ||
Efficiency 75% | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Number of Pins 8 | ||
Output Voltage 2 -0.3V | ||
Series LNK302 | ||
Package Type DIP-B | ||
Depth 6.6mm | ||
Length 9.83mm | ||
Width 3.68 mm | ||
Standards/Approvals RoHS | ||
Maximum Input Voltage 265V ac | ||
Minimum Input Voltage 85V ac | ||
- Pays d'origine :
- CN
LinkSwitch-TN is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while offering much higher performance and energy efficiency. LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high-voltage switched current source, frequency jittering, cycle-by-cycle current limit and thermal shutdown circuitry onto a monolithic IC.
Tight tolerances and negligible temperature variation
System level thermal overload, output short-circuit and open loop protection
Supports buck, buck-boost and flyback topologies
Excellent line and load regulation even with typical configuration
High bandwidth provides fast turn-on with no overshoot
Current limit operation rejects line ripple
Built-in current limit and hysteretic thermal protection