Recom Switching Regulator, Through Hole, 3.3V dc Output Voltage 32V dc, 2 A Output Current
- N° de stock RS:
- 139-2950P
- Référence fabricant:
- R-78B3.3-2.0
- Fabricant:
- Recom
Offre groupée disponible
Consulter les options de prix de grosSous-total (5 unités, conditionné en tube)*
57,25 €
(TVA exclue)
69,25 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 5 - 9 | 11,45 € |
| 10 - 24 | 11,09 € |
| 25 - 49 | 10,75 € |
| 50 + | 10,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 139-2950P
- Référence fabricant:
- R-78B3.3-2.0
- Fabricant:
- Recom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Recom | |
| Product Type | Switching Regulator | |
| Output Voltage 1 | 3.3V dc | |
| Output Current | 2A | |
| Mount Type | Through Hole | |
| Number of Outputs | 1 | |
| Power | 6.6W | |
| Efficiency | 0.92% | |
| Ripple and Noise | 50mV Pk-Pk | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 70°C | |
| Number of Pins | 3 | |
| Series | R-78B-2.0 | |
| Line Regulation | ±0.5 % | |
| Package Type | SIP-3 | |
| Width | 8.5mm | |
| Standards/Approvals | EN 55022, IEC/EN 62368-1, CB Report | |
| Weight | 4g | |
| Length | 11.5mm | |
| Depth | 8.5mm | |
| Maximum Input Voltage | 32V dc | |
| Load Regulation | ±1 % | |
| MTBF | 6349000h | |
| Minimum Input Voltage | 4.75V | |
| Sélectionner tout | ||
|---|---|---|
Marque Recom | ||
Product Type Switching Regulator | ||
Output Voltage 1 3.3V dc | ||
Output Current 2A | ||
Mount Type Through Hole | ||
Number of Outputs 1 | ||
Power 6.6W | ||
Efficiency 0.92% | ||
Ripple and Noise 50mV Pk-Pk | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 70°C | ||
Number of Pins 3 | ||
Series R-78B-2.0 | ||
Line Regulation ±0.5 % | ||
Package Type SIP-3 | ||
Width 8.5mm | ||
Standards/Approvals EN 55022, IEC/EN 62368-1, CB Report | ||
Weight 4g | ||
Length 11.5mm | ||
Depth 8.5mm | ||
Maximum Input Voltage 32V dc | ||
Load Regulation ±1 % | ||
MTBF 6349000h | ||
Minimum Input Voltage 4.75V | ||
- Pays d'origine :
- TW
RECOM Switching Regulator, 92% Maximum Efficiency, 50mV Ripple Voltage - R-78B-2.0 Series - R-78B3.3-2.0
Got a supply voltage and attached components that don't see eye to eye? Put this switching regulator from RECOM in the middle to give your equipment the power it needs. By adapting input voltages between 4.75 and 32V DC to a steady 3.3V DC output, it brings supplies into line and makes them widely compatible. With a 92% maximum efficiency rating, the unit cuts out waste power during conversion to keep your system working efficiently. The regulator doesn't hang around – it starts up in just 10ms so you can GET to work.
• Built-in overtemperature and short-circuit protection to protect your system against faults
• Line regulation rating of ±0.5%, so its output voltage stays stable
• Ripple voltage of 50mV to minimise disruption from electrical noise
• Wide operating temperature range between -40°C and +70°C for use in tough industrial environments
Applications
• Digital cameras
• Office and school buildings
• Building surveyance
How do I install this switching regulator?
You can install this unit on your PCB using through-hole mounting. Simply insert the built-in pins into pre-drilled holes on your board and solder them to the underside.
R78Bxx 2.0 Series Switching Regulator
The Recom R-78Bxx series are highly efficient, non-isolated switching regulators. They offer a high-quality product at a low cost in production quantity. They are ideally suited to replace 78xx linear regulators, as well as being pin compatible.
The convertor has a high-voltage input range and there is no need for heat sinks, due to little energy being wasted. It has a wide input range with continuous short circuit protection and no external components are needed to work efficiently.
Features and Benefits
• Wide operating temperature of -40 to +70 °C at full load
• Pin compatible with TO220 linear regulators
• High efficiency, non-isolated, no need for heatsinks
• Requires no external components
• Continuous short circuit protection
• Low ripple and noise
• Compact size, ensuring space saving
• Positive to negative converter