Murata, LQW, 2520 Unshielded Wirewound Surface Mount Inductor with a Non-Magnetic Core Core, 0.15 μH ±5 % 580 mA Idc
- N° de stock RS:
- 106-5387P
- Référence fabricant:
- LQW2UASR15J00L
- Fabricant:
- Murata
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 106-5387P
- Référence fabricant:
- LQW2UASR15J00L
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Product Type | Wirewound Surface Mount Inductor | |
| Inductance | 0.15μH | |
| Maximum DC Current | 580mA | |
| Package/Case | 2520 | |
| Packaging | Paper Tape | |
| Length | 2.62mm | |
| Automotive Standard | No | |
| Shielding | No | |
| Minimum Operating Temperature | -55°C | |
| Pin Count | 2 | |
| Maximum DC Resistance | 700mΩ | |
| Inductance Tolerance | ±5 % | |
| Series | LQW | |
| Maximum Operating Temperature | 125°C | |
| Termination Style | Solder | |
| Depth | 2.45mm | |
| Standards/Approvals | RoHS | |
| Height | 1.83mm | |
| Core Material | Non-Magnetic Core | |
| Maximum Self Resonant Frequency | 850MHz | |
| Moulded | Yes | |
| Minimum Quality Factor | 45 | |
| Inductor Construction | Wirewound | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Product Type Wirewound Surface Mount Inductor | ||
Inductance 0.15μH | ||
Maximum DC Current 580mA | ||
Package/Case 2520 | ||
Packaging Paper Tape | ||
Length 2.62mm | ||
Automotive Standard No | ||
Shielding No | ||
Minimum Operating Temperature -55°C | ||
Pin Count 2 | ||
Maximum DC Resistance 700mΩ | ||
Inductance Tolerance ±5 % | ||
Series LQW | ||
Maximum Operating Temperature 125°C | ||
Termination Style Solder | ||
Depth 2.45mm | ||
Standards/Approvals RoHS | ||
Height 1.83mm | ||
Core Material Non-Magnetic Core | ||
Maximum Self Resonant Frequency 850MHz | ||
Moulded Yes | ||
Minimum Quality Factor 45 | ||
Inductor Construction Wirewound | ||
- Pays d'origine :
- JP
LQW2UAS Series SMD Chip Inductor
Murata LQW Series wire wound RF inductors incorporates a high Q Value giving great attenuation characteristics inside the pass band of the filters. These LQW inductors are used in matching applications of antennas for maintaining the reception and transmission sensitivity of the antennas. The LQW has low Rdc characteristics and can be employed in choke circuits where high current levels flow.
Features
There are two types of structure available for different applications
High Q Value
Large currents can be supported
Low DC resistance
