Tedea Huntleigh Model 1250 Series Single Point Load Cell, 50 kg, Compression Measure, 1500 kg
- N° de stock RS:
- 185-6015
- Référence fabricant:
- 01250-150K-C3-06X
- Fabricant:
- Tedea Huntleigh
Sous-total (1 unité)*
276,27 €
(TVA exclue)
334,29 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 30 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 276,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-6015
- Référence fabricant:
- 01250-150K-C3-06X
- Fabricant:
- Tedea Huntleigh
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1250 | |
| Sensor Type | Single Point | |
| Terminal Type | Cable | |
| Mount Type | Direct | |
| IP Rating | IP65 | |
| Maximum DC Voltage | 15V dc | |
| Maximum AC Voltage | 15V ac | |
| Housing Material | Aluminium | |
| Width | 80.4mm | |
| Minimum Force/Load Measurement | 50kg | |
| Maximum Force/Load Measurement | 1500kg | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | OIML R60, EEx ia IIC T4, NTEP, RoHS Compliant, FM | |
| Length | 75.4mm | |
| Depth | 80.4mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1250 | ||
Sensor Type Single Point | ||
Terminal Type Cable | ||
Mount Type Direct | ||
IP Rating IP65 | ||
Maximum DC Voltage 15V dc | ||
Maximum AC Voltage 15V ac | ||
Housing Material Aluminium | ||
Width 80.4mm | ||
Minimum Force/Load Measurement 50kg | ||
Maximum Force/Load Measurement 1500kg | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals OIML R60, EEx ia IIC T4, NTEP, RoHS Compliant, FM | ||
Length 75.4mm | ||
Depth 80.4mm | ||
Model 1250 is a single-point load cell designed for direct mounting of large platforms. The product is a cost-effective load cell for use on counting, weighing, bench or floor scale products. Suitable for use in hazardous environments. A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires, sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wires resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
Capacities 50–1500 kg
Aluminium construction
Aluminium construction
Single-point 800 x 800 mm platform
Applications
Large platform scales
Hanging scales
Check weighing
Liens connexes
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure, 1500 kg
- Tedea Huntleigh Models 616 Series Load Cell Compression Measure, 150 kg
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure, 500 kg
- Tedea Huntleigh Models 620 Series Load Cell Load Cell Compression Measure, 5 t
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 350Ω
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 350Ω
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 240 Series Load Cell Load Cell Compression Measure, 50 kg