Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 50 kg
- N° de stock RS:
- 185-6002
- Référence fabricant:
- 01042-050K-C3-23X
- Fabricant:
- Tedea Huntleigh
Sous-total (1 unité)*
92,69 €
(TVA exclue)
112,15 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 11 unité(s) expédiée(s) à partir du 11 août 2026
- Plus 9 unité(s) expédiée(s) à partir du 13 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 92,69 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-6002
- Référence fabricant:
- 01042-050K-C3-23X
- Fabricant:
- Tedea Huntleigh
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1042 | |
| Sensor Type | Low Profile | |
| Terminal Type | Cable | |
| IP Rating | IP66 | |
| Mount Type | Hole | |
| Maximum AC Voltage | 15V ac | |
| Maximum DC Voltage | 15V dc | |
| Housing Material | Aluminium | |
| Width | 25.4mm | |
| Maximum Force/Load Measurement | 50kg | |
| Minimum Force/Load Measurement | 1kg | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | OIML R60, FM, RoHS Compliant, ATEX, IECEX, NTEP | |
| Length | 40mm | |
| Depth | 25.4mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1042 | ||
Sensor Type Low Profile | ||
Terminal Type Cable | ||
IP Rating IP66 | ||
Mount Type Hole | ||
Maximum AC Voltage 15V ac | ||
Maximum DC Voltage 15V dc | ||
Housing Material Aluminium | ||
Width 25.4mm | ||
Maximum Force/Load Measurement 50kg | ||
Minimum Force/Load Measurement 1kg | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals OIML R60, FM, RoHS Compliant, ATEX, IECEX, NTEP | ||
Length 40mm | ||
Depth 25.4mm | ||
Model 1042 is a low profile single-point load cell designed for direct mounting in weighing platforms. Its small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for retail, bench and counting scales. Capacities of 5 kg and above are supplied as standard in anodized Aluminium. A humidity resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extenstion, is achieved by feeding this voltage into the appropriate electronics.
Capacities 1–200 kg
Aluminium construction
Single-point 400 x 400 mm platform
High stiffness version available for dynamic weighing applications
Applications
Bench scales
Counting scales
Grocery scales
Liens connexes
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 20 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 200 kg
- Tedea Huntleigh Model 1042 Series S Type Load Cell Compression Measure, 3 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 5 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 7 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω