Tedea Huntleigh Model 1042 Series S Type Load Cell, 1 kg, Compression Measure, 3 kg
- N° de stock RS:
- 443-8128
- Référence fabricant:
- 1042-0003-F000-RS
- Fabricant:
- Tedea Huntleigh
Sous-total (1 unité)*
121,05 €
(TVA exclue)
146,47 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 121,05 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 443-8128
- Référence fabricant:
- 1042-0003-F000-RS
- Fabricant:
- Tedea Huntleigh
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1042 | |
| Sensor Type | S Type | |
| Terminal Type | Wire | |
| IP Rating | IP66 | |
| Mount Type | Hole | |
| Maximum AC Voltage | 15V ac | |
| Maximum DC Voltage | 15V dc | |
| Housing Material | Aluminium | |
| Width | 150mm | |
| Maximum Force/Load Measurement | 3kg | |
| Minimum Operating Temperature | -10°C | |
| Minimum Force/Load Measurement | 1kg | |
| Maximum Operating Temperature | 40°C | |
| Depth | 20mm | |
| Length | 40mm | |
| Standards/Approvals | OIML, NTEP | |
| Sélectionner tout | ||
|---|---|---|
Marque Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1042 | ||
Sensor Type S Type | ||
Terminal Type Wire | ||
IP Rating IP66 | ||
Mount Type Hole | ||
Maximum AC Voltage 15V ac | ||
Maximum DC Voltage 15V dc | ||
Housing Material Aluminium | ||
Width 150mm | ||
Maximum Force/Load Measurement 3kg | ||
Minimum Operating Temperature -10°C | ||
Minimum Force/Load Measurement 1kg | ||
Maximum Operating Temperature 40°C | ||
Depth 20mm | ||
Length 40mm | ||
Standards/Approvals OIML, NTEP | ||
Statut RoHS : Exempté
Low Profile Aluminium
Compensated Temperature Range -10 to +40°C
Output Impedance 350 +/- 3Ω
Termination Type: Cable
Ultimate Overload: 300% of Rated Load
1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range.
Dimensions: 20 x 40 x 150mm (1 to 30kg); 25.2 x 40 x 150mm (50 to 100kg)
Please also browse our range of output signal conditioners
Liens connexes
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 5 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 7 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 50 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 20 kg