SKF 9 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH9 06 B-1
- N° de stock RS:
- 267-9094
- Référence fabricant:
- PHS 06B-1BH9
- Fabricant:
- SKF
Sous-total (1 unité)*
1,36 €
(TVA exclue)
1,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1,36 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-9094
- Référence fabricant:
- PHS 06B-1BH9
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Sprocket | |
| Number of Teeth | 9 | |
| Bore Type | Rough Stock Bore | |
| Pitch Diameter | 27.85mm | |
| Material | Steel | |
| Hub Diameter | 18mm | |
| Sprocket Width | 20mm | |
| Maximum Inside Diameter | 8mm | |
| Acceptable Chain Type | 06 B-1 | |
| Standards/Approvals | BS, EN | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Sprocket | ||
Number of Teeth 9 | ||
Bore Type Rough Stock Bore | ||
Pitch Diameter 27.85mm | ||
Material Steel | ||
Hub Diameter 18mm | ||
Sprocket Width 20mm | ||
Maximum Inside Diameter 8mm | ||
Acceptable Chain Type 06 B-1 | ||
Standards/Approvals BS, EN | ||
- Pays d'origine :
- CN
SKF Sprocket, 9 Teeth, 8mm Bore Size - PHS 06B-1BH9
This sprocket is a simplex chain wheel designed to transmit rotary motion in power-transmission systems for industrial machinery. It suits single-strand roller chains and is supplied with a rough-machined bore and single-sided hub to allow final fitting to a shaft. Constructed in steel with a protective black oxide finish, it meets European standards for dimensional consistency.
Features & Benefits
• Hardened teeth improve wear resistance during cyclic operation
• Black oxide surface reduces corrosion and stray‑light reflections
• Compatible with 06 B‑1 chain for straightforward integration
• Rough bore allows custom finishing for precise shaft fit
• Black oxide surface reduces corrosion and stray‑light reflections
• Compatible with 06 B‑1 chain for straightforward integration
• Rough bore allows custom finishing for precise shaft fit
**Applications**
• Suitable for conveyor drives in automation lines
• Ideal for timing drives in electrical assembly equipment
• Used with small transmission systems in robotics modules
• Can be used for retrofitting drives in control panels
• Ideal for timing drives in electrical assembly equipment
• Used with small transmission systems in robotics modules
• Can be used for retrofitting drives in control panels
How is the bore prepared for shaft mounting?
The bore is supplied in a rough stock condition so final machining or broaching can be performed to achieve the required shaft tolerance and keyway geometry.
Which material properties affect its service life?
The steel construction combined with tooth hardening up to 25 teeth provides enhanced resistance to contact fatigue and abrasion under standard operating loads.
How does the hub design affect installation?
The single-sided hub gives a clear locating surface for axial positioning and simplifies machining operations when adapting the part to various shaft diameters.
Liens connexes
- SKF 8 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH8 06 B-1
- SKF 25 Tooth Rough Stock Bore Sprocket, PHS 06B-2BH25 06 B-2
- SKF 40 Tooth Rough Stock Bore Sprocket, PHS 06B-1B40 06 B-1
- SKF 38 Tooth Rough Stock Bore Sprocket, PHS 06B-1B38 06 B-1
- SKF 36 Tooth Rough Stock Bore Sprocket, PHS 06B-1B36 06 B-1
- SKF 35 Tooth Rough Stock Bore Sprocket, PHS 06B-1B35 06 B-1
- SKF 11 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH11 06 B-1
- SKF 10 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH10 06 B-1