SKF 40 Tooth Rough Stock Bore Sprocket, PHS 06B-1B40 06 B-1
- N° de stock RS:
- 267-9073
- Référence fabricant:
- PHS 06B-1B40
- Fabricant:
- SKF
Sous-total (1 unité)*
12,91 €
(TVA exclue)
15,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 12,91 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-9073
- Référence fabricant:
- PHS 06B-1B40
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Number of Teeth | 40 | |
| Product Type | Sprocket | |
| Bore Type | Rough Stock Bore | |
| Pitch Diameter | 121.4mm | |
| Hub Diameter | 70mm | |
| Material | Steel | |
| Sprocket Width | 30mm | |
| Maximum Inside Diameter | 48mm | |
| Acceptable Chain Type | 06 B-1 | |
| Standards/Approvals | BS, EN | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Number of Teeth 40 | ||
Product Type Sprocket | ||
Bore Type Rough Stock Bore | ||
Pitch Diameter 121.4mm | ||
Hub Diameter 70mm | ||
Material Steel | ||
Sprocket Width 30mm | ||
Maximum Inside Diameter 48mm | ||
Acceptable Chain Type 06 B-1 | ||
Standards/Approvals BS, EN | ||
- Pays d'origine :
- CN
SKF Sprocket, 48mm Bore Size, 40 Teeth - PHS 06B-1B40
This sprocket is a single-row drive wheel engineered to transfer motion in chain-driven systems across industrial assemblies. It is intended for use where compatibility with 06 B-1 roller chains and standard European manufacturing practices is required, offering a steel construction with a single hub and a machined rough-stock bore to facilitate shaft connection.
Features & Benefits
• Hardened teeth on smaller counts improve wear resistance
• 30mm overall width supports Compact chain runs
• 70mm hub diameter enables robust shaft support
• Steel construction provides high contact fatigue capacity
• 30mm overall width supports Compact chain runs
• 70mm hub diameter enables robust shaft support
• Steel construction provides high contact fatigue capacity
**Applications**
• Suitable for conveyor drive trains in automation lines
• Ideal for timing and indexing in electrical equipment
• Used with 06 B-1 chain for power transmission in machinery
• Can be used for replacement in 06 B-1 chain sprocket drives
• Suitable for retrofits requiring a 40-tooth geometry
• Ideal for timing and indexing in electrical equipment
• Used with 06 B-1 chain for power transmission in machinery
• Can be used for replacement in 06 B-1 chain sprocket drives
• Suitable for retrofits requiring a 40-tooth geometry
What bore preparation is provided for shaft fitting?
The bore is supplied as rough-stock to allow final machining to the EXACT shaft tolerance on site.
How does tooth treatment vary with size?
Teeth up to and including 25 count receive surface hardening to extend service life under cyclic loading.
What surface protection is applied to the component?
A black oxide coating is applied to the steel to limit surface oxidisation prior to assembly.
Which pitch and chain type does it match?
It is designed for a 9.52mm pitch compatible with 06 B-1 roller chain arrangements.
Liens connexes
- SKF 8 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH8 06 B-1
- SKF 25 Tooth Rough Stock Bore Sprocket, PHS 06B-2BH25 06 B-2
- SKF 38 Tooth Rough Stock Bore Sprocket, PHS 06B-1B38 06 B-1
- SKF 36 Tooth Rough Stock Bore Sprocket, PHS 06B-1B36 06 B-1
- SKF 35 Tooth Rough Stock Bore Sprocket, PHS 06B-1B35 06 B-1
- SKF 11 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH11 06 B-1
- SKF 10 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH10 06 B-1
- SKF 45 Tooth Rough Stock Bore Sprocket, PHS 06B-1B45 06 B-1