SKF 21 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH21 06 B-1
- N° de stock RS:
- 267-9088
- Référence fabricant:
- PHS 06B-1BH21
- Fabricant:
- SKF
Sous-total (1 unité)*
5,59 €
(TVA exclue)
6,76 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 5,59 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-9088
- Référence fabricant:
- PHS 06B-1BH21
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Sprocket | |
| Number of Teeth | 21 | |
| Bore Type | Rough Stock Bore | |
| Pitch Diameter | 63.91mm | |
| Material | High Grade Steel | |
| Hub Diameter | 48mm | |
| Sprocket Width | 28mm | |
| Acceptable Chain Type | 06 B-1 | |
| Maximum Inside Diameter | 30mm | |
| Standards/Approvals | EN, BS | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Sprocket | ||
Number of Teeth 21 | ||
Bore Type Rough Stock Bore | ||
Pitch Diameter 63.91mm | ||
Material High Grade Steel | ||
Hub Diameter 48mm | ||
Sprocket Width 28mm | ||
Acceptable Chain Type 06 B-1 | ||
Maximum Inside Diameter 30mm | ||
Standards/Approvals EN, BS | ||
- Pays d'origine :
- CN
SKF Sprocket, 30mm Bore Size, 21 Teeth - PHS 06B-1BH21
This sprocket is a single‑hub simplex component designed to transmit power in roller‑chain drives within industrial equipment. It mates with 06 B‑1 chain types and is produced to European EN and BS standards, offering a standardised sprocket solution for automation and mechanical drive systems.
Features & Benefits
• Hardened teeth on small sizes for extended wear life
• Rough stock bore allows custom machining to fit shafts
• Single‑side hub profile facilitates secure shaft connection
• High‑grade steel construction provides mechanical durability
• Rough stock bore allows custom machining to fit shafts
• Single‑side hub profile facilitates secure shaft connection
• High‑grade steel construction provides mechanical durability
**Applications**
• Suitable for conveyor drives in automated assembly lines
• Used with reduction stages in electromechanical systems
• Ideal for retrofitting industrial chain drives
• Used for replacement in maintenance of 06B-1 chain systems
• Used with reduction stages in electromechanical systems
• Ideal for retrofitting industrial chain drives
• Used for replacement in maintenance of 06B-1 chain systems
What bore range can be finalised for shaft fitting?
The rough stock bore can be machined down to a minimum of 12mm or retained up to a maximum of 30mm to suit specific shaft diameters.
How does the hub profile assist installation?
The single‑side hub profile gives a clear mounting face for locating and securing to the shaft, simplifying alignment during assembly.
What surface protection is applied to the component?
A black oxide coating is applied to the steel to provide Basic corrosion resistance and a uniform appearance.
Liens connexes
- SKF 21 Tooth Rough Stock Bore Sprocket, PHS 06B-2BH21 06 B-2
- SKF 8 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH8 06 B-1
- SKF 25 Tooth Rough Stock Bore Sprocket, PHS 06B-2BH25 06 B-2
- SKF 40 Tooth Rough Stock Bore Sprocket, PHS 06B-1B40 06 B-1
- SKF 38 Tooth Rough Stock Bore Sprocket, PHS 06B-1B38 06 B-1
- SKF 36 Tooth Rough Stock Bore Sprocket, PHS 06B-1B36 06 B-1
- SKF 35 Tooth Rough Stock Bore Sprocket, PHS 06B-1B35 06 B-1
- SKF 11 Tooth Rough Stock Bore Sprocket, PHS 06B-1BH11 06 B-1