IXYS Solid State Relay, 130 mA Load, Surface Mount
- N° de stock RS:
- 906-1152
- Référence fabricant:
- PLB190S
- Fabricant:
- IXYS
Offre groupée disponible
Sous-total (1 unité)*
5,00 €
(TVA exclue)
6,05 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 16 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 24 | 5,00 € |
| 25 - 49 | 4,83 € |
| 50 - 249 | 4,71 € |
| 250 - 499 | 4,39 € |
| 500 + | 4,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 906-1152
- Référence fabricant:
- PLB190S
- Fabricant:
- IXYS
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | IXYS | |
| Product Type | Solid State Relay | |
| Maximum Load Current | 130mA | |
| Mount Type | Surface | |
| Terminal Type | PCB Terminal | |
| Contact Configuration | SPNC | |
| Switching Function | AC/DC Switching | |
| On State Resistance | 30Ω | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 8.4mm | |
| Height | 3.3mm | |
| Standards/Approvals | UL, RoHS, EN/IEC 60950, CSA | |
| Width | 6.3mm | |
| Off State Leakage Current | 1μA | |
| Capacitance | 11pF | |
| Output Type | MOSFET | |
| Sélectionner tout | ||
|---|---|---|
Marque IXYS | ||
Product Type Solid State Relay | ||
Maximum Load Current 130mA | ||
Mount Type Surface | ||
Terminal Type PCB Terminal | ||
Contact Configuration SPNC | ||
Switching Function AC/DC Switching | ||
On State Resistance 30Ω | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 8.4mm | ||
Height 3.3mm | ||
Standards/Approvals UL, RoHS, EN/IEC 60950, CSA | ||
Width 6.3mm | ||
Off State Leakage Current 1μA | ||
Capacitance 11pF | ||
Output Type MOSFET | ||
- Pays d'origine :
- PH
1-Form-B Enhanced Isolation OptoMOS Relay, PLA
The PLA171 uses optically coupled MOSFET technology to offer a high 5000 Vrms input-to-output isolation. It features a unique design with 7mm of space between the input and output pins. It is single pole with normally closed (1-Form-B) contacts.
These units use the well-known OptoMOS architecture where the optically coupled outputs are controlled by highly efficient GaAlAs infrared LED’s.
Potential Applications
Telecommunications: Telecom switching, tip/ring circuits, modem switching (laptop, notebook, pocket size), dial pulsing
Instrumentation: Multiplexers, data acquisition, electronic switching, I/O subsystems
Meters (watt-hour, water, gas)
Medical equipment: Patient/equipment isolation
Security systems
Aerospace
Industrial controls
Features
5000 Vrms input/output isolation
Low drive power requirements (TTL/CMOS Compatible)
No moving parts
High reliability
Arc-free with no snubbing circuits
FCC compatible
VDE compatible
No EMI/RFI generation
Small 6-pin package
Machine insertable, wave solderable
Surface mount tape & reel version available
Ixys Solid State Relays, PCB Mount
Standards
UL, CSA, EN/IEC