IXYS CPC1979 Series Solid State Relay, 14.5 A Load, PCB Mount, 600 V Load
- N° de stock RS:
- 906-1105
- Référence fabricant:
- CPC1979J
- Fabricant:
- IXYS
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 906-1105
- Référence fabricant:
- CPC1979J
- Fabricant:
- IXYS
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | IXYS | |
| Product Type | Solid State Relay | |
| Maximum Load Current | 14.5A | |
| Mount Type | PCB | |
| Maximum Load Voltage | 600V | |
| Series | CPC1979 | |
| Terminal Type | PCB Terminal | |
| Contact Configuration | SPST | |
| Switching Function | No zero cross | |
| On State Resistance | 0.75Ω | |
| Minimum Operating Temperature | -40°C | |
| Package Type | ISOPLUS264 | |
| Maximum Operating Temperature | 85°C | |
| Width | 20.6mm | |
| Standards/Approvals | UL 508 Recognised Component:File E69938 | |
| Length | 19.9mm | |
| Height | 26.2mm | |
| Capacitance | 700pF | |
| Off State Leakage Current | 1μA | |
| Sélectionner tout | ||
|---|---|---|
Marque IXYS | ||
Product Type Solid State Relay | ||
Maximum Load Current 14.5A | ||
Mount Type PCB | ||
Maximum Load Voltage 600V | ||
Series CPC1979 | ||
Terminal Type PCB Terminal | ||
Contact Configuration SPST | ||
Switching Function No zero cross | ||
On State Resistance 0.75Ω | ||
Minimum Operating Temperature -40°C | ||
Package Type ISOPLUS264 | ||
Maximum Operating Temperature 85°C | ||
Width 20.6mm | ||
Standards/Approvals UL 508 Recognised Component:File E69938 | ||
Length 19.9mm | ||
Height 26.2mm | ||
Capacitance 700pF | ||
Off State Leakage Current 1μA | ||
- Pays d'origine :
- PH
1-Form-A OptoMOS Power Relay, CPC
These single pole solid state relays have normally open (1-Form-A) contacts. They feature a unique ISOPLUS-264 package giving the highest possible load current and power ratings. They are able to provide 2500 Vrms of input to output isolation by utilising optically coupled MOSFET technology.
The optically coupled outputs use the well-known OptoMOS architecture and are controlled by a highly efficient infrared LED. With a low on-resistance and a high load current rating these units are suitable for a wide variety of applications.
The unique ISOPLUS-264 package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.3C per watt.
Potential Applications:
Industrial controls/motor control
Robotics
Medical equipment: Patient/equipment isolation
Instrumentation: Multiplexers, data acquisition, electronic switching and I/O subsystems
Energy meters
Transportation equipment
Aerospace/defence
Features
2.25 Arms load current with 5°C per watt heat sink
Low on-resistance
Selection of blocking voltages
2500 Vrms input/output isolation
Low thermal resistance
Isolated, low thermal impedance ceramic pad for heat sink applications
Low drive power requirements
Arc-free with no snubbing circuits
No EMI/RFI generation
Machine insertable, wave solderable
Ixys Solid State Relays, PCB Mount
Standards
UL 508 Certified Component: File E69938
Liens connexes
- IXYS Solid State Relay Surface Mount, 600 V Load
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount