IXYS CPC40055ST Series Solid State Relay, 40 A Load, PCB Mount, 800 V Load
- N° de stock RS:
- 906-1102
- Référence fabricant:
- CPC40055ST
- Fabricant:
- IXYS
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
- N° de stock RS:
- 906-1102
- Référence fabricant:
- CPC40055ST
- Fabricant:
- IXYS
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | IXYS | |
| Product Type | Solid State Relay | |
| Maximum Load Current | 40A | |
| Mount Type | PCB | |
| Maximum Load Voltage | 800V | |
| Minimum Load Voltage | 20V ac | |
| Series | CPC40055ST | |
| Terminal Type | PCB Terminal | |
| Contact Configuration | SPNC | |
| Minimum Operating Temperature | -40°C | |
| Switching Function | Zero Cross Switching | |
| Maximum Operating Temperature | 85°C | |
| Package Type | SIP | |
| Height | 17.8mm | |
| Width | 9.169mm | |
| Length | 38.1mm | |
| Standards/Approvals | UL 508 Recognised Component | |
| Output Type | AC | |
| Capacitance | 3pF | |
| Off State Leakage Current | 100μA | |
| Sélectionner tout | ||
|---|---|---|
Marque IXYS | ||
Product Type Solid State Relay | ||
Maximum Load Current 40A | ||
Mount Type PCB | ||
Maximum Load Voltage 800V | ||
Minimum Load Voltage 20V ac | ||
Series CPC40055ST | ||
Terminal Type PCB Terminal | ||
Contact Configuration SPNC | ||
Minimum Operating Temperature -40°C | ||
Switching Function Zero Cross Switching | ||
Maximum Operating Temperature 85°C | ||
Package Type SIP | ||
Height 17.8mm | ||
Width 9.169mm | ||
Length 38.1mm | ||
Standards/Approvals UL 508 Recognised Component | ||
Output Type AC | ||
Capacitance 3pF | ||
Off State Leakage Current 100μA | ||
- Pays d'origine :
- PH
Dual Power SCR Output, AC power Switch, SuperSip, CPC
These AC power solid state switches use dual power SCR outputs. Tightly controlled zero cross circuitry also ensures low noise switching of AC loads by minimizing the generation of transients. Optically coupled input and output circuits provide 2500 Vrms of isolation. This also includes noise immunity between control and load circuits. This makes them ideally suited to applications where electromagnetic interference could disrupt the operation of electromechanical relays.
The unique SuperSIP package allows these units to achieve the highest load current currently available in a similar sized package. This package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.35°C per watt.
Potential Applications:
Lighting
Programmable control
Process control
Power control Panels
Remote switching
Petrol pump electronics
Contactors
Large relays
Solenoids
Motors
Heaters
Features
Zero-cross switching
2500Vrms isolation, input to output
DC voltage control, AC output
Optically isolated
Low EMI and RFI generation
High noise immunity
Machine insertable, wave solderable
Ixys Solid State Relays, PCB Mount
Standards
UL 508 Recognized Component: File E69938
Liens connexes
- IXYS Solid State Relay Surface Mount, 800 V Load
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount
- IXYS Solid State Relay Surface Mount