Dold BF9250 Series Solid State Relay, 10 A Load, Top Hat Rail Mount, 280 V Load, 48V Control
- N° de stock RS:
- 375-5163
- Référence fabricant:
- BF9250.01/001 UH=DC24V AC10A AC24-480V
- Fabricant:
- Dold
Visuel non contractuel
Sous-total (1 unité)*
178,52 €
(TVA exclue)
216,01 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 11 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 178,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 375-5163
- Référence fabricant:
- BF9250.01/001 UH=DC24V AC10A AC24-480V
- Fabricant:
- Dold
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dold | |
| Maximum Load Current | 10A | |
| Product Type | Solid State Relay | |
| Mount Type | Top Hat Rail | |
| Maximum Load Voltage | 280V | |
| Minimum Load Voltage | 24V dc | |
| Maximum Control Voltage | 48V | |
| Minimum Control Voltage | 3V | |
| Series | BF9250 | |
| Terminal Type | Cage Clamp | |
| IP Rating | IP40, IP20 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 40°C | |
| Length | 85mm | |
| Width | 120mm | |
| Height | 22.5mm | |
| Off State Leakage Current | 1mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Dold | ||
Maximum Load Current 10A | ||
Product Type Solid State Relay | ||
Mount Type Top Hat Rail | ||
Maximum Load Voltage 280V | ||
Minimum Load Voltage 24V dc | ||
Maximum Control Voltage 48V | ||
Minimum Control Voltage 3V | ||
Series BF9250 | ||
Terminal Type Cage Clamp | ||
IP Rating IP40, IP20 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 40°C | ||
Length 85mm | ||
Width 120mm | ||
Height 22.5mm | ||
Off State Leakage Current 1mA | ||
- Pays d'origine :
- MT
Semiconductor contactor
Semiconductor contactors for wear-free, silent switching of AC loads such as heating, motors, valves and lighting
The cost of investing in this new technology is quickly recovered where high switching rates are used
Zero-voltage switching to prevent feedback to the main power grid
Integrated temperature monitoring ensures the device is protected from damage caused by excess current
In accordance with EN 60 947-4-2, IEC 60 158-2, VDE 0660 part 109
Single-phase or 3-phase design
Control input X1 with low power consumption, e.g. for PLC control
High switching frequency coupled with long service life
Compact construction with integrated heat sink
For switching AC loads up to 480 V
Protection circuit with varistors
Temperature monitoring via LED display and semiconductor output (memory preservation)
3 LED displays
Top-hat rail mounting
Semiconductor Contactors
A range of complete ’ready to use’ devices that comprise relay and heat sink in one compact DIN rail mountable unit. Typical applications include control of non motor loads where high operating frequencies are encountered.
Liens connexes
- Dold BF9250 Series Solid State Relay Top Hat Rail Mount 48V Control
- Dold BF9250 Series Solid State Relay Top Hat Rail Mount 48V Control
- Dold Monitoring Relay DIN Rail 12 V dc, 230 V ac
- Dold Monitoring Relay DIN Rail 220 V dc
- Dold Monitoring Relay 3 Phase DIN Rail
- Dold Monitoring Relay 1 Phase DIN Rail
- Dold 12A MK 9397N Motor Load Monitor 400 V ac -20 °C
- Dold Monitoring Relay DIN Rail, 600000 ipm 24 V dc