e2s ST Series Amber Multiple Effect LED Beacon, 230 V ac, LED Bulb, AC, IP66
- N° de stock RS:
- 772-0887
- Référence fabricant:
- ST-L101HAC230A
- Fabricant:
- e2s
Visuel non contractuel
Sous-total (1 unité)*
107,88 €
(TVA exclue)
130,53 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 107,88 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 772-0887
- Référence fabricant:
- ST-L101HAC230A
- Fabricant:
- e2s
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | e2s | |
| Range | Sonora | |
| Series | ST | |
| Component Type | Beacon | |
| Multifunction | Yes | |
| Current Type | AC | |
| Light Effect | Flashing, Steady | |
| Lens Colour | Amber | |
| Lamp Included | Yes | |
| Bulb Type | LED | |
| Supply Voltage | 230 V ac | |
| Height | 86mm | |
| IP Rating | IP66 | |
| Maximum Temperature | +55°C | |
| Minimum Temperature | -25°C | |
| Sélectionner tout | ||
|---|---|---|
Marque e2s | ||
Range Sonora | ||
Series ST | ||
Component Type Beacon | ||
Multifunction Yes | ||
Current Type AC | ||
Light Effect Flashing, Steady | ||
Lens Colour Amber | ||
Lamp Included Yes | ||
Bulb Type LED | ||
Supply Voltage 230 V ac | ||
Height 86mm | ||
IP Rating IP66 | ||
Maximum Temperature +55°C | ||
Minimum Temperature -25°C | ||
- Pays d'origine :
- GB
e2s Customisable Signal Tower
The e2s Sonora ST LED beacon is a customisable signal tower with an amber lens. The tower has a Xenon, or high output LED source. It features a pre-wired junction box and cable loom, enabling the end-user to determine beacon type and position during installation.
Note:
All LED colours use a clear lens to maximise output and to ensure the signal is most effective in high ambient light levels.
Note:
All LED colours use a clear lens to maximise output and to ensure the signal is most effective in high ambient light levels.
Features and Benefits
The supply voltage of 230VAC
Multiple configurations of Xenon and LED beacons
Internal cable loom and termination PCB simplifies installation
Common negative/ neutral supply minimises cabling
High output LED unit can be set to steady or flashing
Grey RAL7038 ABS housing with stainless steel fixings and 2 x M20 cable entries
Polycarbonate lens
Flashing and steady light effect
Height is 86mm
Operating temperature ranges between -25⁰C and 55⁰C
Multiple configurations of Xenon and LED beacons
Internal cable loom and termination PCB simplifies installation
Common negative/ neutral supply minimises cabling
High output LED unit can be set to steady or flashing
Grey RAL7038 ABS housing with stainless steel fixings and 2 x M20 cable entries
Polycarbonate lens
Flashing and steady light effect
Height is 86mm
Operating temperature ranges between -25⁰C and 55⁰C
Certifications
IP66 rated
UL94V0 approved
UL94V0 approved
Liens connexes
- e2s ST Series Amber Multiple Effect LED Beacon LED Bulb IP66
- e2s ST Series Green Multiple Effect LED Beacon LED Bulb IP66
- e2s ST Series Red Multiple Effect LED Beacon LED Bulb IP66
- e2s ST Series Green Multiple Effect LED Beacon LED Bulb IP66
- e2s ST Series Blue Multiple Effect LED Beacon LED Bulb IP66
- e2s ST Series Red Multiple Effect LED Beacon LED Bulb IP66
- e2s ST Series Amber Flashing Effect Beacon Unit Xenon Bulb IP66
- e2s MBL1 Series Amber Multiple Effect Beacon Wall Mount IP67