e2s ST Series Amber Flashing Effect Beacon Unit, Xenon Bulb 230V ac, AC, IP66
- N° de stock RS:
- 772-0868
- Référence fabricant:
- ST-L101XAC230A
- Fabricant:
- e2s
Visuel non contractuel
Sous-total (1 unité)*
107,88 €
(TVA exclue)
130,53 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 107,88 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 772-0868
- Référence fabricant:
- ST-L101XAC230A
- Fabricant:
- e2s
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | e2s | |
| Series | ST | |
| Product Type | Beacon Unit | |
| Component Type | Beacon | |
| Multifunction | No | |
| Current Type | AC | |
| Current Consumption | 35mA | |
| Light Effect | Flashing | |
| Mount Type | Surface | |
| Lens Colour | Amber | |
| Lamp Included | Yes | |
| Bulb Type | Xenon | |
| Maximum Supply Voltage | 230V ac | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 55°C | |
| Height | 86mm | |
| Standards/Approvals | RoHS | |
| Base Diameter | 86mm | |
| Hazardous Area Certification | No | |
| IP Rating | IP66 | |
| Housing Colour | Amber | |
| Sélectionner tout | ||
|---|---|---|
Marque e2s | ||
Series ST | ||
Product Type Beacon Unit | ||
Component Type Beacon | ||
Multifunction No | ||
Current Type AC | ||
Current Consumption 35mA | ||
Light Effect Flashing | ||
Mount Type Surface | ||
Lens Colour Amber | ||
Lamp Included Yes | ||
Bulb Type Xenon | ||
Maximum Supply Voltage 230V ac | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 55°C | ||
Height 86mm | ||
Standards/Approvals RoHS | ||
Base Diameter 86mm | ||
Hazardous Area Certification No | ||
IP Rating IP66 | ||
Housing Colour Amber | ||
Customisable Signal Tower, STA & STB Series
The STA and STB series from e2S are customisable signal towers featuring either 2 or 3 AlertAlight L101 type beacons. Each beacon position can contain either a Xenon or high output LED light source. The assembly of the STB2 beacon towers features a prewired junction box and cable loom enabling the end user to determine beacon type and position during installation. The STA version has a SONF1 alarm sounder which synchronises automatically on multi-unit systems.
Features and Benefits
• Multiple configurations of Xenon and LED beacons
• Internal cable loom and termination PCB simplifies installation
• Common negative/neutral supply minimises cabling
• High output LED unit can be set to steady or flashing
• Grey RAL7038 ABS housing with stainless steel fixings and 2 x M20 cable entries
• Polycarbonate lens
• IP66 ingress protection
• Operating temperature of -25 to +55 °C
Note
All LED colours use a Clear lens to maximise output and to ensure the signal is most effective in high ambient light levels.
Liens connexes
- e2s ST Series Amber Flashing Effect Beacon Unit DC, IP66
- e2s ST Series Red Flashing Effect Beacon Unit AC, IP66
- e2s ST Series Blue Flashing Effect Beacon Unit AC, IP66
- e2s ST Series Amber Flashing LED Bulb 230V ac IP66
- e2s ST Series Green Flashing Effect Beacon Unit DC, IP66
- e2s ST Series Red Flashing Effect Beacon Unit DC, IP66
- e2s ST Series Blue Flashing Effect Beacon Unit DC, IP66
- e2s STB Series Clear Red Green Amber Flashing Effect Beacon Tower AC, IP66