Phoenix Contact, IFS-USB-PROG Series USB Programming Tool
- N° de stock RS:
- 801-6107
- Numéro d'article Distrelec:
- 304-10-446
- Référence fabricant:
- 2811271
- Fabricant:
- Phoenix Contact
Offre groupée disponible
Sous-total (1 unité)*
146,35 €
(TVA exclue)
177,08 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 6 unité(s) expédiée(s) à partir du 05 janvier 2026
- Plus 4 unité(s) expédiée(s) à partir du 05 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 146,35 € |
| 10 - 24 | 133,91 € |
| 25 - 49 | 130,26 € |
| 50 + | 127,32 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 801-6107
- Numéro d'article Distrelec:
- 304-10-446
- Référence fabricant:
- 2811271
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Accessory Type | USB Programming Tool | |
| Series | IFS-USB-PROG | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Accessory Type USB Programming Tool | ||
Series IFS-USB-PROG | ||
- Pays d'origine :
- DE
Phoenix Contact Analogue USB Programming Tool - IFS-USB-PROG-ADAPTER - 2811271
Looking for a device that lets you write programs in an interface module? This innovative programming tool from Phoenix Contact is the ideal choice. You can use it to set the parameters of your MACX (multiplexed analogue components)analogue and mini analogue devices.
The tool uses a simple plug-and-go connection system, so no complex installation is needed. It has two connectors for quick and direct setup. The first is a USB (universal serial bus) cable, which you attach to your computer and the second is an interface-to-transducer module you plug into a device with an S-port interface.
Through this link, you can configure analogue field instruments using FDT/DTM or Analog-CONF software on your computer. Use this USB programming tool to adjust the settings of your microcontrollers and audio modules. An operating temperature range of -20°C to +65°C means you can use it even in demanding industrial environments.
The tool uses a simple plug-and-go connection system, so no complex installation is needed. It has two connectors for quick and direct setup. The first is a USB (universal serial bus) cable, which you attach to your computer and the second is an interface-to-transducer module you plug into a device with an S-port interface.
Through this link, you can configure analogue field instruments using FDT/DTM or Analog-CONF software on your computer. Use this USB programming tool to adjust the settings of your microcontrollers and audio modules. An operating temperature range of -20°C to +65°C means you can use it even in demanding industrial environments.
Features & Benefits
• USB 2.0 full speed allows quick data transmission without lag
• EMC (electromagnetic capability) directive prevents signal interference
• Low (0.1401kg) weight means it's easy to move and store
• EMC (electromagnetic capability) directive prevents signal interference
• Low (0.1401kg) weight means it's easy to move and store
Liens connexes
- Pepperl + Fuchs USB Programming Tool
- Phoenix Contact IFS-BT-PROG-ADAPTER Series Adapter for Use with Interface System Gateways MINI
- Phoenix Contact USB Cable IFS-USB-DATACABLE Series
- Pepperl + Fuchs USB Programming Tool for Use with IO-Link Sensor
- Infineon EZ-BLE Module Programming Kit Programmer Evaluation Board CYBLE-212006-PROG
- SICK USB Programming Tool for Use with AFM60 DFS60, VFS60
- Infineon Programming Kit CYBLE-012011-PROG Bluetooth Evaluation Board for CY8CKIT-002 or MPQ-PSoC, CY8CKIT-042-BLE
- Phoenix Contact Connector, IFS-RS232-DATACABLE Series