Baumer Mounting Bracket for Use with Mounting Clamp, DIN84, DIN934 Standard
- N° de stock RS:
- 481-7723
- Référence fabricant:
- Z 119.018
- Fabricant:
- Baumer
Sous-total (1 unité)*
14,30 €
(TVA exclue)
17,30 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 14,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 481-7723
- Référence fabricant:
- Z 119.018
- Fabricant:
- Baumer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Baumer | |
| Product Type | Encoder Wheel | |
| Accessory Type | Mounting Bracket | |
| For Use With | Mounting Clamp | |
| Hazardous Area Certification | No | |
| Standards/Approvals | DIN84, DIN934 | |
| Sélectionner tout | ||
|---|---|---|
Marque Baumer | ||
Product Type Encoder Wheel | ||
Accessory Type Mounting Bracket | ||
For Use With Mounting Clamp | ||
Hazardous Area Certification No | ||
Standards/Approvals DIN84, DIN934 | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Coder accessories
Measuring wheels
Connected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017
For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015
For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006
For synchro flange coders.
3 eccentrics are needed to fit the coder.
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Liens connexes
- Baumer Mounting Bracket for Use with Incremental Encoder
- Baumer Mounting Bracket for Use with Counter, Encoder
- Baumer Mounting Bracket for Use with SENSOFIX
- Baumer Mounting Bracket for Use with 14 Series
- Baumer Mounting Bracket for Use with Series 10
- Baumer T445
- Festo Bracket SLG-Z-18-A, For Use With Cylinder Mounting
- Festo Bracket SLG-Z-8/12-A, For Use With Cylinder Mounting