Omron, F3SG-R Series Single-Ended Cable for Receiver 14.9 mm for Use with Receiver M12 Connector (8-pin)
- N° de stock RS:
- 215-5074
- Référence fabricant:
- F39-JG20A-D
- Fabricant:
- Omron
Sous-total (1 unité)*
123,93 €
(TVA exclue)
149,96 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 05 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 123,93 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 215-5074
- Référence fabricant:
- F39-JG20A-D
- Fabricant:
- Omron
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Accessory Type | Single-Ended Cable for Receiver | |
| Product Type | Sensor Accessory | |
| For Use With | Receiver M12 Connector (8-pin) | |
| Series | F3SG-R | |
| Hazardous Area Certification | No | |
| Diameter | 14.9mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Accessory Type Single-Ended Cable for Receiver | ||
Product Type Sensor Accessory | ||
For Use With Receiver M12 Connector (8-pin) | ||
Series F3SG-R | ||
Hazardous Area Certification No | ||
Diameter 14.9mm | ||
Standards/Approvals No | ||
Omron F3SG-R Series Sensor Accessory, 14.9mm Diameter, Single-Ended Cable for Receiver - F39-JG20A-D
This sensor accessory is a single-ended cable designed to connect to a receiver with an M12 8-pin connector in safety light curtain installations. It serves as an interface cable for receiver units in industrial safety sensor systems, providing a straightforward means to link the receiver to downstream equipment in environments where a dedicated receiver connection is required.
Features and Benefits:
• Single-ended design simplifies termination and installation
• Compatible with receiver M12 8-pin connections for straightforward integration
• Intended for use with F3SG-R systems to maintain system compatibility
• Not certificated for hazardous areas allowing standard industrial placement
• Compatible with receiver M12 8-pin connections for straightforward integration
• Intended for use with F3SG-R systems to maintain system compatibility
• Not certificated for hazardous areas allowing standard industrial placement
Applications
• Used with safety light curtain receivers in production lines
• Suitable for connection to factory automation safety circuits
• Ideal for retrofitting receivers in access-control installations
• Can be used for maintenance replacements of receiver cables
• Suitable for connection to factory automation safety circuits
• Ideal for retrofitting receivers in access-control installations
• Can be used for maintenance replacements of receiver cables
What connector type does it interface with?
It interfaces with an M12 connector using eight pins to match receiver wiring requirements.
Is this cable intended for use in explosive atmospheres?
No, it is not certificated for hazardous-area use and should be installed in non-hazardous locations.
Which receiver family is this cable compatible with?
It is designed for compatibility with receivers within the F3SG-R safety sensor family.
What form-factor characteristic could affect routing through conduit?
The cable has a diameter of 14.9mm, which should be considered when planning routing and conduit entry sizes.
Liens connexes
- Omron, F3SG-R Series Single-Ended Cable for Receiver 14.9 mm for Use with Receiver M12 Connector (8-pin)
- Omron, F3SG-JG Series Single-Ended Cable for Receiver 14.9 mm for Use with Receiver M12 Connector (8-pin)
- Omron, F39-JG Series Connecting Cable 14.9 mm for Use with F3SG-RA
- Omron, F3SG-R Series 14.9 mm for Use with Receiver M12 Connector (8-pin)
- Omron, F3SG-R Series 14.9 mm for Use with cable extension and simple wiring
- Omron, F39-J Series Connecting Cable 14.9 mm for Use with F3SG-RA
- Omron, F3SG-R Series for Use with Receiver M12 Connector (8-pin)
- Omron CE Standard