Omron, F3SG-R Series Single-Ended Cable for Receiver 14.9 mm for Use with Receiver M12 Connector (8-pin)
- N° de stock RS:
- 215-5071
- Référence fabricant:
- F39-JG15A-D
- Fabricant:
- Omron
Sous-total (1 unité)*
99,18 €
(TVA exclue)
120,01 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 99,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 215-5071
- Référence fabricant:
- F39-JG15A-D
- Fabricant:
- Omron
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Product Type | Sensor Accessory | |
| Accessory Type | Single-Ended Cable for Receiver | |
| For Use With | Receiver M12 Connector (8-pin) | |
| Series | F3SG-R | |
| Hazardous Area Certification | No | |
| Diameter | 14.9mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Product Type Sensor Accessory | ||
Accessory Type Single-Ended Cable for Receiver | ||
For Use With Receiver M12 Connector (8-pin) | ||
Series F3SG-R | ||
Hazardous Area Certification No | ||
Diameter 14.9mm | ||
Standards/Approvals No | ||
Omron F3SG-R Series Sensor Accessory, 14.9mm Diameter, Single-Ended Cable for Receiver - F39-JG15A-D
This sensor accessory is a single-ended cable designed to connect to a receiver with an M12 8-pin connector and is compatible with F3SG-R safety equipment. It functions as a dedicated wiring interface between an Omron safety receiver and upstream cabling, enabling signal transmission in industrial safety circuits where an 8-pin M12 receiver input is required.
Features and Benefits:
• 8-pin M12 termination ensures correct signal pin allocation for receivers
• Single-ended configuration simplifies connection to safety receiver
• Compatible with F3SG-R equipment for straightforward integration
• No hazardous-area certification reduces unnecessary specification complexity
• Single-ended configuration simplifies connection to safety receiver
• Compatible with F3SG-R equipment for straightforward integration
• No hazardous-area certification reduces unnecessary specification complexity
Applications
• Suitable for wiring safety light curtains to receivers
• Ideal for factory automation safety circuit connections
• Used with M12 receiver ports in machine safeguarding setups
• Can be used for replacing damaged 8-pin receiver cables
• Ideal for factory automation safety circuit connections
• Used with M12 receiver ports in machine safeguarding setups
• Can be used for replacing damaged 8-pin receiver cables
What connector type does it interface with?
It interfaces directly with an 8-pin M12 receiver connector, matching the pin count and form factor required by the receiving device.
Is this cable intended for intrinsically safe zones?
No, it has no hazardous-area certification and should not be specified for classified explosive atmospheres.
Can this cable be used with other Omron safety families?
Its design targets use with F3SG-R safety equipment and receiver inputs with an M12 8-pin configuration
compatibility with other families depends on matching connector and signalling requirements.
What is the physical cross-section characteristic of the product?
The accessory has a nominal circular profile with a diameter of 14.9mm suited to standard routing and clamp fittings.
Liens connexes
- Omron, F3SG-R Series Single-Ended Cable for Receiver 14.9 mm for Use with Receiver M12 Connector (8-pin)
- Omron, F3SG-JG Series Single-Ended Cable for Receiver 14.9 mm for Use with Receiver M12 Connector (8-pin)
- Omron, F39-JG Series Connecting Cable 14.9 mm for Use with F3SG-RA
- Omron, F3SG-R Series 14.9 mm for Use with Receiver M12 Connector (8-pin)
- Omron, F3SG-R Series 14.9 mm for Use with cable extension and simple wiring
- Omron, F39-J Series Connecting Cable 14.9 mm for Use with F3SG-RA
- Omron, F3SG-R Series for Use with Receiver M12 Connector (8-pin)
- Omron CE Standard