SKF Nitrile Rubber (NBR) Radial Shaft Seal, 85 mm ID, 100 mm OD, 9 mm
- N° de stock RS:
- 267-3908
- Référence fabricant:
- 85X100X9 HMSA10 RG
- Fabricant:
- SKF
Sous-total (10 unités, dans un pack de 10)*
43,10 €
(TVA exclue)
52,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 4,31 € | 43,10 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-3908
- Référence fabricant:
- 85X100X9 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 85mm | |
| Outside Diameter | 100mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 9mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 85mm | ||
Outside Diameter 100mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 9mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Radial Shaft Seal, 85mm Inside Diameter, 100mm Outside Diameter - 85X100X9 HMSA10 RG
This radial shaft seal provides a rotating-shaft sealing solution designed to prevent fluid leakage and exclude contaminants in rotating equipment. It is MADE from nitrile rubber and intended for applications where a resilient lip material is required to maintain contact with a moving shaft and preserve system integrity.
Features and Benefits:
• Nitrile rubber construction resists common oils and greases
• Rotary shaft seal design sustains continuous shaft motion
• 9 mm cross-section delivers consistent sealing contact
• 85 mm inner diameter ensures snug shaft engagement
• 100 mm outer diameter offers stable housing fit
• Rotary shaft seal design sustains continuous shaft motion
• 9 mm cross-section delivers consistent sealing contact
• 85 mm inner diameter ensures snug shaft engagement
• 100 mm outer diameter offers stable housing fit
Applications
• Suitable for sealing rotating gearbox shafts
• Ideal for hydraulic motor and pump interfaces
• Used with industrial drive shafts requiring oil retention
• Can be used for replacements in maintenance tasks
• Appropriate for rotating assemblies needing dust exclusion
• Ideal for hydraulic motor and pump interfaces
• Used with industrial drive shafts requiring oil retention
• Can be used for replacements in maintenance tasks
• Appropriate for rotating assemblies needing dust exclusion
What material characteristics affect chemical compatibility?
The lip material is nitrile rubber, which provides compatibility with many lubricants and oils commonly used in rotating equipment.
How does the seal accommodate shaft and housing tolerances?
The design uses a flexible sealing lip that conforms to the shaft at the specified inner diameter while the outer diameter locates in the housing bore.
What physical dimensions determine fitment?
Fit depends on the internal diameter, external diameter and cross-section thickness, which correspond to shaft size and bore depth.
How does the seal perform during continuous rotation?
The sealing geometry is configured for rotary applications to maintain contact under steady rotational motion.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 100 mm OD, 9 mm
- SKF Nitrile Rubber (NBR) Seal 85 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 130 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 140 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 120 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 115 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 110 mm OD, 12 mm