SKF Nitrile Rubber (NBR) Radial Shaft Seal, 40 mm ID, 52 mm OD, 8 mm
- N° de stock RS:
- 266-9123
- Référence fabricant:
- 40X52X8 HMSA10 RG
- Fabricant:
- SKF
Sous-total (10 unités, dans un pack de 10)*
20,61 €
(TVA exclue)
24,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 2,061 € | 20,61 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 266-9123
- Référence fabricant:
- 40X52X8 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 40mm | |
| Outside Diameter | 52mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 8mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 40mm | ||
Outside Diameter 52mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 8mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Radial Shaft Seal, 40mm Inside Diameter, 52mm Outside Diameter - 40X52X8 HMSA10 RG
This radial shaft seal provides a rotating-shaft sealing solution for machinery where fluid retention and contaminant exclusion are required. It is constructed from nitrile rubber to function in rotary sealing applications, fitting shafts with a 40 mm inner diameter and housing bores around a 52 mm outer diameter, and is intended for installations where an 8 mm-wide sealing element is appropriate.
Features and Benefits:
• Nitrile rubber composition resists common oils and fuels
• Rotary lip design reduces leakage at shaft interfaces
• 8 mm thickness supports stable axial sealing force
• 40 mm inner diameter ensures accurate shaft fit
• 52 mm outside diameter maintains secure bore retention
• Rotary lip design reduces leakage at shaft interfaces
• 8 mm thickness supports stable axial sealing force
• 40 mm inner diameter ensures accurate shaft fit
• 52 mm outside diameter maintains secure bore retention
Applications
• Suitable for sealing oil in gearbox assemblies
• Ideal for rotating pumps with shaft diameters of 40 mm
• Used with electric motor drives requiring oil retention
• Can be used for hydraulic component shaft sealing
• Suitable for replacement in metric machinery maintenance
• Ideal for rotating pumps with shaft diameters of 40 mm
• Used with electric motor drives requiring oil retention
• Can be used for hydraulic component shaft sealing
• Suitable for replacement in metric machinery maintenance
What material characteristics affect chemical compatibility?
The elastomer is nitrile rubber which offers resistance to many mineral oils and common hydraulic fluids while remaining flexible at moderate operating temperatures.
How should the seal be installed to avoid damage?
Alignment tools or a flat driver should be used to press the seal squarely into the bore to prevent lip distortion and ensure even seating.
What inspection criteria indicate end-of-life for the seal?
Visible lip hardening, cracks in the elastomer, or persistent leakage at the shaft Interface indicate the seal should be replaced.
How does shaft surface finish influence performance?
A smooth, scratch-free shaft with appropriate roundness minimises wear on the sealing lip and prolongs operational life.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 8 mm