RS PRO Diamond Tipped Tungsten Carbide Tip Scribe
- N° de stock RS:
- 394-190
- Numéro d'article Distrelec:
- 304-14-324
- Fabricant:
- RS PRO
Sous-total (1 unité)*
5,29 €
(TVA exclue)
6,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 69 unité(s) expédiée(s) à partir du 11 mai 2026
- Plus 383 unité(s) expédiée(s) à partir du 11 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 5,29 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 394-190
- Numéro d'article Distrelec:
- 304-14-324
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Scribe | |
| Diamond Tipped | Yes | |
| Material | Tungsten Carbide Tip | |
| Point Type | Straight | |
| Overall Length | 150mm | |
| Finish | Chrome | |
| Tip Diameter | 6mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Scribe | ||
Diamond Tipped Yes | ||
Material Tungsten Carbide Tip | ||
Point Type Straight | ||
Overall Length 150mm | ||
Finish Chrome | ||
Tip Diameter 6mm | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
RS PRO Straight Tungsten Carbide Tip Scribe
This tungsten carbide tipped scribe from RS PRO is designed for making marks on materials, typically for later cutting or joining. Thanks to the tip's tungsten carbide composition, the point is much more hardwearing than a normal high-speed steel scribe, meaning that it can be used with very hard or abrasive materials without wearing out quickly. This makes it suitable for marking stainless steel, glass or ceramic – and of course, it can be used on softer materials as well. It's made with a pocket clip for ease of use and with a hexagonal shaft for easy grip, or to allow it to be used with a holder.
This scribe would typically be used in an engineering shop to allow measured lines to be clearly marked on materials or scribed along straight edges. These lines could then be used for cutting or folding.
Features and Benefits
• Straight-angled
• Tungsten carbide tip material