Wera Interchangeable Stubby Screwdriver Set, 19-Piece

Voir la catégorie

Sous-total (1 unité)*

85,47 €

(TVA exclue)

103,42 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 50 unité(s) prête(s) à être expédiée(s)
  • Plus 19 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +85,47 €

*Prix donné à titre indicatif

N° de stock RS:
201-2199
Numéro d'article Distrelec:
301-79-945
Référence fabricant:
05057471001
Fabricant:
Wera
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Wera

Product Type

Interchangeable Stubby Screwdriver Set

Screwdriver Type

Interchangeable Stubby Screwdriver Set

Number of Pieces

19

Tip Size

6.35 mm

Standards/Approvals

DIN ISO 1173-C 6.3 and Wera connection series 1

Non conforme

Kraftform Kompakt Stubby 1


Handle/interchangeable blade system for lightning fast replacement of the required blade. Especially small bit-holding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1. With strong permanent magnet, which also holds large and heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. High-quality BiTorsion bits with a softer BiTorsion zone to prevent twisting of the bit tip under high loads. This significantly increases product life. Compact, textile box with high robustness, low weight and volume. Suitable for docking with the Wera 2go system.

Handle/Interchangeable blade system for rapid exchange of the blade

Stubby bit hand holder: short compact shape for working in confined spaces

Ergonomic 2-component Kraftform handle for precise work

Bits with BiTorsion zone to cushion load peaks

Take it easy tool finder: colour coding according to profile and size

1x Kraftform Kompakt Stubby 1, 19 pieces; 1x 811/1 Stubby Bitholding screwdriver, magnetic, 1/4"; 2x 851/1 BTZ bits: PH 1x25, PH 2x25; 2x 855/1 BTZ bits: PZ 1x25, PZ 2x25; 5x 867/1 BTZ TORX® bits: TX 10x25, TX 15x25, TX 20x25, TX 25x25, TX 30x25; 6x 840/1 BTZ bits: 2.0x25, 2.5x25, 3.0x25, 4.0x25, 5.0x25, 5.5x25; 3x 800/1 BTZ bits: 0.8x5.5x25, 1.0x5.5x25, 1.2x6.5x25; 1x Hook and Loop Fastener Strip 70, 70 x 50 mm

Stubby, short and compact shaped bit hand holder is used for confined spaces

It allows high power transmission due to non slip, softer grip areas

It has hexagonal features which allows not to roll out away from the work place

Liens connexes

Recently viewed